User Accounts Management - D-Link DES-3226S User Manual

User Accounts Management

From the Main Menu, highlight Setup User Accounts and press Enter, then the User Account Management menu appears.
Click New to add a user.
1. Enter the new user name, assign an initial password, and then confirm the new password. Determine whether the new
user should have Admin or User privileges.
2. Click on APPLY to make the user addition effective.
3. A listing of all user accounts and access levels is shown on the user accounts control table. This list is updated when
Apply is executed.
4. Please remember that Apply makes changes to the Switch configuration for the current session only. All changes
(including User additions or updates) must be entered into non-volatile ram using the Save Changes command on the
Main Menu - if you want these changes to be permanent.
DES-3226S Layer 2 Fast Ethernet Switch User's Guide
Figure 6 - 2. User Accounts Control Table
Figure 6 - 3. User Accounts Control Table – Add
41