Using Ieee 802.1X Authentication With Vlan Assignment - Cisco WS-C2960-24LC-S Software Configuration Manual

Software guide
Table of Contents

Advertisement

Chapter 9
Configuring IEEE 802.1x Port-Based Authentication
Table 9-1
Table 9-1
Attribute Number
Attribute[1]
Attribute[4]
Attribute[5]
Attribute[8]
Attribute[25]
Attribute[30]
Attribute[31]
Attribute[40]
Attribute[41]
Attribute[42]
Attribute[43]
Attribute[44]
Attribute[45]
Attribute[46]
Attribute[49]
Attribute[61]
1. The Framed-IP-Address AV pair is sent only if a valid Dynamic Host Control Protocol (DHCP) binding
You can view the AV pairs that are being sent by the switch by entering the debug radius accounting
privileged EXEC command. For more information about this command, see the Cisco IOS Debug
Command Reference, Release 12.2 at this URL:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_command_reference_book09186a008
00872ce.html
For more information about AV pairs, see RFC 3580, "IEEE 802.1X Remote Authentication Dial In User
Service (RADIUS) Usage Guidelines."

Using IEEE 802.1x Authentication with VLAN Assignment

The RADIUS server sends the VLAN assignment to configure the switch port. The RADIUS server
database maintains the username-to-VLAN mappings, assigning the VLAN based on the username of
the client connected to the switch port. You can use this feature to limit network access for certain users.
OL-8603-04
lists the AV pairs and when they are sent are sent by the switch:
Accounting AV Pairs
AV Pair Name
User-Name
NAS-IP-Address
NAS-Port
Framed-IP-Address
Class
Called-Station-ID
Calling-Station-ID
Acct-Status-Type
Acct-Delay-Time
Acct-Input-Octets
Acct-Output-Octets
Acct-Session-ID
Acct-Authentic
Acct-Session-Time
Acct-Terminate-Cause
NAS-Port-Type
exists for the host in the DHCP snooping bindings table.
Understanding IEEE 802.1x Port-Based Authentication
START
INTERIM
Always
Always
Always
Always
Always
Always
1
Never
Sometimes
Always
Always
Always
Always
Always
Always
Always
Always
Always
Always
Never
Never
Never
Never
Always
Always
Always
Always
Never
Never
Never
Never
Always
Always
Catalyst 2960 Switch Software Configuration Guide
STOP
Always
Always
Always
1
Sometimes
Always
Always
Always
Always
Always
Always
Always
Always
Always
Always
Always
Always
9-9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ws-c2960s-24td-lWs-c2960s-48lpd-lCatalyst 2960

Table of Contents