Table of Contents
Advertisement
Features & Controls
W@er/Washer Lever
The lever on the right side of the
steering column controls the windshield
wipers and washers.
Move the wiper switch
to
the position
you want:
OFF
-
The wipers are off.
INT
-
Intermittent wiper operation
(if your Tracker has this). In light
rain or snow, you might want to use
this position rather than continuous
wiping.
LO
-
The wipers will run
continuously at low speed.
HI
-
The wipers will run
continuously at high speed.
1 9 . 7 2
For a single wiping cycle, push the lever
to MIST. Hold it
there until the wipers
Damaged wiper blades may
start, then let go. The wipers will stop
prevent you from seeing well
after one cycle. If you want more
enough in
a storm to
drive safely.
cycles, hold the lever on MIST longer.
To avoid damage,
be
sure to clear
Washers
I I
ice
and
snow
from
the wiper
I
Pull the wipedwasher lever toward you
to spray washer fluid on the windshield.
The spray will continue until you release
the lever. This will also turn on the low
meed wiDers.
blades before using them. If
they're frozen to the windshield,
carefully loosen or thaw them. If
your blades
do
become damaged,
get new blades or blade inserts.
c
I
Heavy snow or ice can overload your
wipers. A circuit breaker will stop them
until the motor cools. Clear away snow
or ice to prevent an overload.
Advertisement
Table of Contents
