Table of Contents
Advertisement
Service & Appearance Care
How
to Check Lubricant:
If the level is below the bottom of the
filler plug hole, you'll need to add some
lubricant.
If the differential is at operating
temperature (warm), add enough
lubricant to raise the level to the bottom
of the filler plug hole.
If the differential is cold, add enough
lubricant to raise the level to 1/2 inch
(12
mm)
below the filler plug hole.
What to Use:
Refer to the Maintenance Schedule to
determine what kind of lubricant to use.
See "Recommended Fluids and
Lubricants" in the Index.
Engine
Coolant
The following explains your cooling
system and how to add coolant when it
is low. If you have a problem with
engine overheating, see "Engine
Overheating" in the Index.
The proper coolant for your Geo will:
Give freezing protection down to
Give boiling protection up to 258°F
Protect against rust and corrosion.
Help keep the proper engine
Let the warning lights work as they
-34°F (-37°C).
(125°C).
temperature.
should.
What to Use:
Use a mixture of one-half clean water
(preferably distilled) and one-half
antifreeze or approved recycled coolant
that meets "GM Specification 6038M,"
which won't damage aluminum parts.
Also use GM Engine Coolant
Supplement (sealer) with a complete
coolant change. If you use these, you
don't need to add anything else.
Advertisement
Table of Contents
