Table of Contents
Advertisement
Then, follow these steps:
1. Remove the filler plug.
2, Check that the lubricant level is up to
the bottom of the filler plug hole.
How to Add Fluid:
Here's how to add fluid. Refer to the
Maintenance Schedule to see what kind
of fluid to use. See "Recommended
Fluids and Lubricants" in the Index.
1
.
Remove the filler plug.
2. Add fluid at the filler plug hole. Add
only enough fluid to bring the fluid
level up to the bottom
of
the filler
plug hole.
plug is fully seated.
3.
Install the filler plug. Be sure the
Clutch Adjustment
The clutch linkage in your vehicle
should be checked as recommended in
your Maintenance Schedule. To check,
push the clutch pedal down with your
hand until you feel some resistance to
movement of the pedal. If the pedal
moves freely up to an inch (25 mm) or
so before you feel resistance to the
travel, adjustment isn't needed.
If there is no free travel or very little
(less than
5 / 8
of an inch), see your
dealer for adjustment.
Rear Axle
When
to
Check and Change
Lubricant:
Refer to the Maintenance Schedule to
determine how often
to
check the
lubricant and when to change it. See
"Periodic Maintenance Inspections" and
"Scheduled Maintenance Services" in
the Index.
How to Check Lubricant:
If the level is below the bottom of the
filler plug hole, you'll need to add some
lubricant. Add enough lubricant to raise
the level to the bottom of the filler plug
hole.
Advertisement
Table of Contents
