The longer side with the tape visible
should face to the right. If you hear
nothing or hear just a garbled sound, it
may not be in squarely. Press
A
to
remove the tape and start over. Once the
tape is playing, use the knobs for
volume and balance, just as you do for
the radio. The lighted arrows show
which side of the tape is playing.
Your bias is set automatically. When a
metal or chrome tape is inserted,
"MTL" is shown on the display.
Fast Forward
Press FF to rapidly advance to another
part of the tape. Press FF, RCL/PROG
or
A
(Stop/Eject) to return to
playing speed.
Rewind
Press REW to rapidly reverse the tape.
Press REW, RCLlPROG or
A
(Stop/Eject) to return to playing speed.
To Play the Next Selection
Press NEXT to go forward to the
beginning of the next selection.
For NEXT to work properly, your tape
must have at least three or four seconds
of silence between each selection.
Previous
Press PREV to hear the last selection
over. Press PREV again or press
RCL/PROG or
(Stop/Eject) to
cancel this function.
Program
Press RCL/PROG to switch from one
side of the tape to the other.
Your cassette tape player can play
continuously because the player has an
auto-reverse feature.
Dolby DD@
Press
00
to remove noise from
Dolby DD@ NR-encoded tapes.
Dolby@' Noise Reduction is
manufactured under license from Dolby
Laboratories Licensing Corporation.
Dolby and the double-D symbol are
trademarks of Dolby Laboratories
Licensing Corporation.