Table of Contents
Advertisement
NO.
1
2
3
SERVICE
Wheel Bearings Inspection
-
Inspect every
15 months, or at
15,000
mile (25 OOO
km)
intervals.
Inspect for wear and proper adjustment. Relubricate
the bearings if grease is contaminated.
Propeller Shafts and U-Joints
Inspection
-
Inspect for looseness and damage. Do
this every 15 months, or at 15,000 mile (25 000
k m )
intervals, or more frequently if used off-road or
pulling a trailer. Tighten U-Joint flange bolts if
necessary.
Clutch (Manual Transmission Only)
-
At each oil
change, inspect for correct free play and positive
engagement. See "Clutch Adjustment'' in the Index.
Maintenance Schedule
Uther Nun-Emissun Related Maintenance
Service
ITEM
4
Tire and Wheel Inspection
and Rotation
-
For
proper wear and maximum tire life, rotate your tires
at 7,500 miles (12 500
km)
and then every
15
, O O O
miles (25 OOO
km).
See "Tires, Inspection
and Rotation" in the Index. Check the tires for
uneven wear or damage. If you see irregular or
premature wear, check the wheel alignment. Check
for damaged wheels also.
While the tires and wheels are removed for rotation,
perform the brake system inspection described in
Section C.
Advertisement
Table of Contents
