Table of Contents
Advertisement
Service & Appearance Care
I
-
256
If your spare wheel does not match your
other wheels, you may want to use this
pattern.
After the tires have been rotated, adjust
the front and rear inflation pressure as
shown
on
the Tire-Loading Information
label. Make certain that all wheel nuts
are properly tightened. See "Wheel Nut
Torque'' in the Index.
C A
U
TION
A
Rust or dirt on a wheel, or on
the parts to which it is
fastened, can make the wheel nuts
become loose after a time. The
wheel could come off and cause an
accident. When you change a
wheel, remove any rust or dirt
from places where the wheel
attaches to the vehicle. In an
emergency, you can use a cloth or
paper towel to do this; but be sure
to use a scraper or wire brush
later, if you need to, to get all the
rust or dirt off. (See "Changing a
Flat Tire" in the Index.)
I
When It's Time for New Tires
One
way
to tell when it's time
for
new
tires is to check the treadwear
indicators, which will appear when your
tires have only 2/32 inch (1.6 mm) or
less of tread remaining.
You need a new tire if
You can see the indicators at three
You can see cord or fabric showing
The tread or sidewall is cracked, cut
places around the tire.
through the tire's rubber.
or snagged deep enough to show cord
or fabric.
Advertisement
Table of Contents
