Nexcom NViS 6708 User Manual page 93

Appendix B: NViS 6708 RAID Configuration
• RAID Stand-by Timer Settings
Use this option to set the time, in minutes, before the RAID enters standby
mode. If there is no host access to the RAID after the preset time, it will
transition to standby mode.
• RAID Rebuild Priority Settings
Use this option to set the RAID Rebuild Priority, which determines the
amount of system resources allocated to the rebuilding process. Low
priority means the rebuilding process will use fewer system resources and
take more time to complete, while high priority means the rebuilding
process will be completed faster but may result in slower access to the
RAID.
Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved.
Notification
1. After creating the RAID volume, ensure you go to Windows Disk
Management to initialize the disks.
79
NViS 6708 User Manual