Nexcom NViS 6708 User Manual

Intelligent digital security video intelligent surveillance

page of 119

/ 119
Bookmarks

Quick Links

Download this manual

NEXCOM International Co., Ltd.

Intelligent Digital Security

Video Intelligent Surveillance

NViS 6708

User Manual

NEXCOM International Co., Ltd.

Published May 2025

www.nexcom.com

Need help?

Do you have a question about the NViS 6708 and is the answer not in the manual?

Questions and answers

Summary of Contents for Nexcom NViS 6708

Page 1 NEXCOM International Co., Ltd. Intelligent Digital Security Video Intelligent Surveillance NViS 6708 User Manual NEXCOM International Co., Ltd. www.nexcom.com Published May 2025...
Page 2 Knowing Your NViS 6708 ...............3 Debug Connector ................21 Front Panel ..................3 PCIe Slot ..................22 Rear Panel ...................4 Fan Connectors ................26 Mechanical Dimensions ................6 USB 2.0 Header ................27 Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 3 For Racks with a Depth Over 800~1000mm ..........97 Password Configuration ..............59 Inner Sliding Rail Installation and Detachment ........100 Intel AMT Configuration ..............60 System Installation on Rack ..............102 Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 4 CE compliant, and provides the HDMI ® part of this manual may be reproduced, copied, translated or transmitted in compliance statement. any form or by any means without the prior written consent from NEXCOM International Co., Ltd. Declaration of Conformity Disclaimer...
Page 5 (Cr6+) < 0.1% or 1,000ppm, Polybrominated biphenyls (PBB) < 0.1% or 1,000ppm, and Polybrominated diphenyl Ethers (PBDE) < 0.1% or 1,000ppm. In order to meet the RoHS compliant directives, NEXCOM has established an engineering and manufacturing task force to implement the introduction of green products.
Page 6 (manuals, cable, etc.) and any components from the card, such as CPU and RAM. If the components were suspected as part of the problems, ▪ If RMA goods can not be repaired, NEXCOM will return it to the customer please note clearly which components are included. Otherwise, NEXCOM without any charge.
Page 7 ESD workstation. If no such station is available, you can provide some ESD protection by wearing an antistatic wrist strap and attaching it to a metal part of the computer chassis. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 8 There is a danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions. viii Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 10 Élément 4: Avant d’étendre le rack jusqu’à la position d’installation, lisez les instructions d’installation. N’exercez aucune charge sur l’équipement monté sur rail coulissant en position d’installation. Ne laissez pas l’équipement monté sur glissière en position d’installation. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 11 Preface Technical Support and Assistance Conventions Used in this Manual 1. For the most updated information of NEXCOM products, visit NEXCOM’s Warning: website at www.nexcom.com. Information about certain situations, which if not observed, can cause personal injury. This will prevent injury to yourself 2.
Page 12 Tel: +886-2-8226-7786 Tel: +886-2-8976-3077 Beitun District, Fax: +886-2-8226-7782 Email: sales@diviotec.com Taichung City, 406, Taiwan, R.O.C. Email: services@tmrtek.com www.diviotec.com Tel: +886-4-2249-1179 www.tmrtek.com Fax: +886-4-2249-1172 Email: jacobhuang@nexaiot.com www.nexaiot.com Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 13 LongGang District, 4-11-5, Shiba Minato-ku, ShenZhen, 518112, China Tokyo, 108-0014, Japan Tel: +86-755-8364-7768 Tel: +81-3-5419-7830 Fax: +86-755-8364-7738 Fax: +81-3-5419-7832 Email: steveyang@nexcom.com.tw Email: sales@nexcom-jp.com www.nexcom.cn www.nexcom-jp.com xiii Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 14 Preface Package Contents Ordering Information Before continuing, verify that the NViS 6708 package that you received is The following information below provides ordering information for the complete. Your package should have all the items listed in the following table. NViS 6708.
Page 15 2.0b x 1, HDMI 1.4 x 1 ® ® ▪ DDR4, up to 64GB ▪ 2 X 2.5GbE Intel Ethernet ▪ Audio in/out, Mic ▪ 1 x PCIe x16 Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 16 ▪ 1 x Audio port (Line in / Line out / MIC) ▪ UL compliance ▪ 2 x RJ45 LAN port (2 x 2.5Gps) ▪ 1 x GPIO 4in/2out Expansions ▪ 1 x PCIe x16 Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 17 When the HDD is powered on, one LED on the HDD tray lights up blue, and the other LED turns green when the drive is active. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 18 900mA per port. 12. Audio Jacks (Line in/Line out/MIC in) Connect to audio equipment, these jacks include line in (light blue), line out (lime), and mic in (pink). Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 19 Connect to an external device with a maximum load of 24V, 1.0A. 14. PCIe Slots Used to connect PCIe expansion cards, supporting PCIe Gen 4 1x16 or PCIe Gen 3 2x8, configured in BIOS. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 20 Chapter 1: Product Introduction Mechanical Dimensions 441.20 439.60 21.80 21.80 276.00 276.00 561.40 587.90 184.00 184.00 57.50 57.50 450.40 ∅6.50 465.20 88.00 76.20 5.40 482.00 Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 21 Static electricity can damage many of the electronic ▪ Use correct screws and do not over tighten screws. components. Humid environments tend to have less static electricity than Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 22 (on) and open (off). Two-Pin Jumpers: Open (Left) and Short (Right) Three-Pin Jumpers: Pins 1 and 2 are Short Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 23 Chapter 2: Jumpers and Connectors Locations of the Mainboard Jumpers and Connectors The figure below shows the locations of the NViS 6708 mainboard jumpers and connectors. Refer to the figure below for detailed information on pin settings and definitions marked in pink.
Page 24 Chapter 2: Jumpers and Connectors External I/O Interfaces HDMI 1.4 Connector Connector location: CON1 Definition Definition HDMI14_CM_DP2 HDMI14_CM_DN2 HDMI14_CM_DP1 HDMI14_CM_DN1 HDMI14_CM_DP0 HDMI14_CM_DN0 HDMI14_CM_CKP HDMI14_CM_CKN HDMI14_SCL HDMI14_SDA V5P0_HDMI0 HDMI14_HPD Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 25 DP14_TX_CM_N0 DP14_TX_CM_P1 HDMI20_CRLS_DP1 GND2 DP14_TX_CM_N1 HDMI20_CRLS_DN1 DP14_TX_CM_P2 GND3 HDMI20_CRLS_DP0 HDMI20_CRLS_DN0 DP14_TX_CM_N2 DP14_TX_CM_P3 HDMI20_CRLS_CKP GND4 DP14_TX_CM_N3 HDMI20_CRLS_CKN DP14_OB_AUX_EN DP14_AUXP_SNK GND5 HDMI20_CRLS_SCL HDMI20_CRLS_SDA DP14_AUXN_SNK DP14_HPD_SNK V5P0_HDMI1 V3P3_DP14 HDMI20_RT_HPD_SNK Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 26 1Gbp/s network link GND10 USB31_2_RXN_CM 100Mbps or no link USB31_2_RXP_CM GND12 USB31_2_TXN_CM USB31_2_TXP_CM LAN1_PHY_P0 LAN1_PHY_N0 LAN1_PHY_P1 LAN1_PHY_N1 LAN1_PHY_P2 LAN1_PHY_N2 LAN1_PHY_P3 LAN1_PHY_N3 GND13 V3P3A_LAN1 LAN1_PHY_LED_ACT_N_R LAN1_PHY_LED_1000_N_R LAN1_PHY_LED_2500_N_R Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 27 1Gbp/s network link GND10 USB31_4_RXN_CM 100Mbps or no link USB31_4_RXP_CM GND12 USB31_4_TXN_CM USB31_4_TXP_CM LAN2_PHY_P0 LAN2_PHY_N0 LAN2_PHY_P1 LAN2_PHY_N1 LAN2_PHY_P2 LAN2_PHY_N2 LAN2_PHY_P3 LAN2_PHY_N3 GND13 V3P3A_LAN2 LAN2_PHY_LED_ACT_N_R LAN2_PHY_LED_1000_N_R LAN2_PHY_LED_2500_N_R Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 28 Connector type: Line In, Line Out, MIC Connector location: HDA1 Line In LIne Out Definition Definition AGND_P MIC_OUT_L_C AGND_P MIC1_JD MIC_OUT_R_C LINE_OUT_L_C AGND_G FRONT_JD LINE_OUT_R_C LINE-L_C AGND_B LINEIN1_JD LINE-R_C Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 29 Definition Definition Definition GND1 GND2 V12P0_HDD0 GND3 GND4 V5P0_HDD0 V12P0A_2_1 V12P0A_2_2 V12P0A_2_3 V12P0A_2_4 Definition Definition V12P0_HDD1 V5P0_HDD1 Definition Definition V12P0_HDD2 V5P0_HDD2 CN10 Definition Definition V12P0_HDD3 V5P0_HDD3 Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 30 RSATA_CON2_RXN RSATA_CON2_RXP GND3 GND3 CN6 (Port1) CN11 (Port3) Definition Definition Definition Definition GND1 RSATA_CON1_TXP GND1 RSATA_CON3_TXP RSATA_CON1_TXN GND2 RSATA_CON3_TXN GND2 RSATA_CON1_RXN RSATA_CON1_RXP RSATA_CON3_RXN RSATA_CON3_RXP GND3 GND3 Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 31 M2B_PCI_RST_N M2B_USB2_DN M2B_SATA_LED_N GND8 GND3 M2B_CONFIG_0 M2B_SMDAT GND9 M2B_SMCLK GND4 M2B_PER1N M2B_PER1P GND5 M2B_SUSCLK M2B_PET1N M2B_CONFIG_1 V3P3_M2B_3 M2B_PET1P DEVSLP GND10 V3P3_M2B_4 GND6 GND11 V3P3_M2B_5 M2B_PER0P M2B_CONFIG_2 Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 32 Connector location: CN13 Connector location: CN14 Definition Definition Definition Definition V3P3A V3P3_DSW HDR_RI_N RSTBTN_N HDR_CTS_N HDR_RTS_N PWRBTN_N_S2 HDR_DSR_N LED_HDD_PU LED_HDD_LOGIC_N HDR_DTR_N HDR_TXD LED_PWR_PU LED_PWR_LOGIC_N HDR_RXD HDR_DCD_N Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 33 V3P3A_M2M_9 GND10 M2M_NVME_PCH_CLKREQ_N NVME_RXP2 NVME_CLKN M2M_WAKE_N GND5 NVME_CLKP NC16 NVME_TXN2 GND11 NC17 NVME_TXP2 NC26 M2M_SUSCLK GND6 M2M_SSD_DETECT V3P3A_M2M_3 NVME_RXN1 GND12 V3P3A_M2M_4 NVME_RXP1 GND13 V3P3A_M2M_5 GND7 GND14 Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 34 Connector location: CN16 Connector location: CN17 Definition Definition Definition Definition V5P0_4I4O SATA_SGPIO_DOUT1 PIO_IN_80 PIO_OUT_84 SATA_SGPIO_DOUT0 SATA_SGPIO_LOAD PIO_IN_81 PIO_OUT_85 SATA_SGPIO_CLK DUG_SDA PIO_IN_82 PIO_OUT_86 DUG_SCLK DUG_RXD PIO_IN_83 PIO_OUT_87 DUG_TXD V3P3A Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 35 Chapter 2: Jumpers and Connectors Debug Connector Connector location: CN19 Definition Definition V3P3A DBG_ESPI_RST0_N DBG_ESPI_IO0 DBG_ESPI_IO1 DBG_ESPI_IO2 DBG_ESPI_IO3 DBG_ESPI_CS0_N DBG_ESPI_CLK DBG_PLTRST_N Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 36 GND_2 RSVD3 GND_11 PEG_SLOT_CLKP PEG_SLOT_CLKN CPU_PEG_RXP4 CPU_PEG_RXN4 GND_3 CPU_PEG_RXP0 GND_12 GND_13 CPU_PEG_RXN0 GND_4 CPU_PEG_RXP5 CPU_PEG_RXN5 PEG_PWR_EN GND_5 GND_14 GND_15 CPU_PEG_RXP1 CPU_PEG_RXN1 Continued on the next page Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 37 CPU_PEG_RXP13 CPU_PEG_RXN8 GND_20 CPU_PEG_RXN13 GND_30 GND_21 CPU_PEG_RXP9 GND_31 CPU_PEG_RXP14 CPU_PEG_RXN9 GND_22 CPU_PEG_RXN14 GND_32 GMD_23 CPU_PEG_RXP10 GND_33 CPU_PEG_RXP15 CPU_PEG_RXN10 _GND_24 CPU_PEG_RXN15 GND_34 Continued on the next page Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 38 PEG_B12 PEG_TXP4 PEG_TXN4 GND_37 PEG_TXP0 GND_46 GND_47 PEG_TXN0 GND_38 PEG_TXP5 PEG_TXN5 PEG_PRSNT2_N GND_39 GND_48 GND_49 PEG_TXP1 PEG_TXN1 PEG_TXP6 PEG_TXN6 GND_40 GND_41 Continued on the next page Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 39 GND_63 PEG_TXP13 PEG_TXN8 GND_54 PEG_TXN13 GND_64 GND_55 PEG_TXP9 GND_65 PEG_TXP14 PEG_TXN9 GND_56 PEG_TXN14 GND_66 GND_57 PEG_TXP10 GND_67 PEG_TXP15 PEG_TXN10 GND_58 PEG_TXN15 GND_68 GND_59 PEG_TXP11 PEG_PRSNT2_2nd_Slot_N PEG_SEL_X8_X16 Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 40 Connector location: FAN1, FAN2, FAN3, FAN4 FAN1 FAN3 Definition Definition Definition Definition V12P0_FANG1 V12P0S SYS2_FAN_TACO SYS2_FAN_PWM CPU_FAN_TACO CPU_FAN_PWM FAN2 FAN4 Definition Definition Definition Definition V12P0_FANG1 V12P0_FANG2 SYS1_FAN_TACO SYS1_FAN_PWM SYS3_FAN_TACO SYS3_FAN_PWM Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 41 USB 2.0 Header POE Connector Connector location: J1 Connector location: J2 Definition Definition Definition Definition V5P0_USB2_HDR V5P0_USB2_HDR V12POE V12POE USB2_5_DN_CM USB2_6_DN_CM POE_RXD_IN POE_TXD_OUT USB2_5_DP_CM USB2_6_DP_CM POE_RST_OUT Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 42 Chapter 2: Jumpers and Connectors PWR_SW Connector Connector type: Wire to BD connector Connector location: PWR_SW1 Definition Definition PWRBTN_N Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 43 SATA cable connect. Max length < 152mm SATA connect M.2 . Max length < 178mm NVMe/SATA 3.0 PCIe Gen4 x 1 M.2 Key B USB 3.0 Gen 1 x 1 2280 Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 45 Unscrew the I#6-32 screw on the rear panel. Press the buttons indicated below, then slide the top cover outward and lift it up to fully open the chassis. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 47 DIMM 1 or DIMM 2 according to their requirements. 2. Note that the memory sockets are designed with fool-proof measures. Do not force-plug the memory module(s) if they are not oriented correctly. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 49 Release the load lever by pushing it down from the retention tab, then pull it up. Lift the CPU load plate up to open the socket completely. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 50 CPU with the corresponding triangle load plate. marker and notches on the CPU load bracket. Gently push the load lever down until it locks under the retention tab. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 51 CPU installation, and make sure the Retrieve the CPU cooler from the accessory box, which includes a CPU is installed properly. heatsink module and thermal paste. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 52 CPU socket. holes mentioned in the previous step on the mainboard. Tighten the screws following the order marked in the image below. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 53 Plug the heatsink module power connector into CPU fan header (FAN3) The installation is complete. on the mainboard. Ensure the connector is fully inserted into the fan header. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 54 Insert the M.2 module into the M.2 Key M slot at a 45-degree angle until the gold-plated connector on the edge of the module completely disappears into the slot. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 55 Chapter 3: System Setup Push the M.2 module down and secure it with the screw that was removed from step Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 56 Insert the M.2 module into the M.2 Key M slot at a 45-degree angle until the gold-plated connector on the edge of the module completely disappears into the slot. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 57 Chapter 3: System Setup Push the M.2 module down and secure it with the screw that was removed from step Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 58 Insert an HDD following the orientation shown below into the HDD tray HDD tray ( ), then push the HDD forward until it clicks into place ( Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 59 Insert the HDD tray with the installed HDD back into the HDD bay of the both sides of the HDD tray. system, repeating the steps to install additional HDDs if needed. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 60 Loosen the F#6-32 screws on both sides of the panels using a screwdriver Push the latch upward until it reaches 90 degrees using your fingers. with a counterclockwise orientation. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 61 Chapter 3: System Setup Push the 3.5” HDD forward ( ), then lift it upwards with your fingers to remove it ( Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 62 Chapter 3: System Setup Installing an Add-On Card Remove the PCIe cover by loosening the screws on the chassis, then set the screws aside for later use. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 63 Chapter 3: System Setup Remove the PCIe brackets by loosening the screws on the chassis, then set the screws aside for later use. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 64 Pick up the PCIe 8P to 6 + 2P*2 power cable from the accessory box, Plug the power cable into the add-on card. depending on the add-on card installation requirements. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 65 Chapter 3: System Setup Plug the add-on card into the motherboard. Insert the power cable into the system’s power supply and organize the cable. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 66 Chapter 3: System Setup Secure the add-on card with the screws removed in step Follow step 1 to reassemble the PCIe cover. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 67 BIOS is updated in the future. When to Configure the BIOS To check for the latest updates and revisions, visit the NEXCOM website at www.nexcom.com.tw. ▪ This program should be executed under the following conditions: ▪...
Page 68 Powering on the computer and immediately pressing <Del> allows you to enter Setup. Load optimized default values. Press the key to enter Setup: Saves and exits the Setup program. Press <Enter> to enter the highlighted sub-menu Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 69 When “” appears on the left of a particular field, it indicates that a submenu which contains additional options are available for that field. To display the submenu, move the highlight to that field and press Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 70 TPM 2.0 devices. Auto will support both TPM 1.2 and 2.0 devices with the default set to TPM 2.0 devices if not found, and TPM 1.2 devices will be enumerated. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 71 Go to System Agent (SA) Configuration, and then find the setting for PCIe slots (X16 Mode Select). Navigate to the Clipset tab within the BIOS menu. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 72 X8 (Disabled) Once you have configured the desired mode, save the changes and exit the BIOS. Restart your system to apply the new PCIe slot configuration. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 73 Chapter 4: BIOS Setup Password Configuration Navigate to the Security tab within the BIOS menu, and go to Administrator Password. Administrator Password Select this to reconfigure the administrator’s password. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 74 Navigate to the MEBx tab within the BIOS menu. Press <Enter> button of uppercase letters, lowercase letters, numbers, and symbols. For to access this feature. By default, the password is “admin.“ example, !QAZ1qaz Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 75 State, then change the option to Network Active. Return to the BIOS main menu, navigate to the Save & Exit tab, and click Save Changes and Reset to apply the settings. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 76 Alternatively, you can access IAMT configuration page by Click the Continue if a warning message appears to remind https://127.0.0.1:16993 or https://localhost:16993 on local you that the connection isn't private. side. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 77 Follow the same login procedure as outlined in step 6 using the same address, account, and password. Ensure that the remote control system is in the same network segment as the target system. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 78 This versatile digital pin, controlled by software, can function as GPO2 GPO1 GPI3 GPI1 an input, output, or both, allowing you to customize its behavior and Output Input connect with various external devices. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 80 “Driver\install.bat.” When the installation is successful, the screen will shown “Drivers installed successfully”. Unzip the file and then copy the Nexcom folder from the Driver folder into: C:\Windows\System32\drivers. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved.
Page 81 Open Computer Management and check Device Manager to see whether the Nexcom XCare Driver driver is enabled. Once enabled, refer to the next section for basic configurations. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 82 Follow the images below for configuring the GPIO. GPI (4 IN) GPO (2 OUT) GPI (4 IN) GPO (2 OUT) Default GPI Off=1 Default GPO Off=V Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 83 Extract the 39xRAIDManagerWin_JMicron_0.09.79.zip file and execute Due to a limitation from Intel, the Windows Device Manager will display the setup.exe. only one disk per JM39x controller. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 84 RAID information will be updated in real-time, allowing users to monitor basic configuration on the connected disks. The user may click the tab ( the status intuitively. directly as per your requirements. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 85 The user may simply click the RAID Information label ( ) to identify the member disks of the specified RAID, with all disk LEDs flashing simultaneously. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 86 ). The user may simply click the Disk Information label ( window ( ) to identify the specified RAID with the disk LEDs flashing. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 87 ) button, the user can save the logs to a profile. Follow the pop-up windows to complete the procedure. Meanwhile, the user can also clear all logs by simply pressing the Clear ( ) button. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 88 RAID and calculate the RAID capacity. The selected disks charts will be drawn in the cross pattern on the right corner ( Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 89 To delay the RAID volume, simple click the DELETE ALL RAID in the desired controller window. If multiple controllers have been created and you want to delete them all, each one must be deleted individually. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 90 Click the tabs in the left-side panel to switch between basic and authentication of the sender’s credentials. Once the settings above are advanced modes. completed, click the Apply button ( ) to activate them. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 91 On this tab ( ), the user can browser the firmware information and update the firmware if necessary. Follow the procedures below to update the firmware. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 92 ), the users can adjust the RAID Stand-by Timer and set the Rebuild Priority. Once the firmware update is completed, a dialog will be popped up and ask to restart the controller to take effect. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 94 There are two reset buttons located at the rear of the bay tray within the chassis. Press the corresponding reset button based on the desired RAID. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 95 Appendix B: NViS 6708 RAID Configuration Installing the Application on Linux • Extract the raidmgr_linux_x86_64.zip file and execute raidmgr with sudo privillege in terminal. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 96 1. $ GC 1. $ DC C0 Use this command to get all available JMB39X controllers. Use this command to display corresponding info. For controller 0. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 97 1. $ SS C0 Use this command to show available RAID info. For controller 0. Use this command to show available SATA info. For controller 0. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 98 Use this command to create RAID 5 using disk 0, 1, 2, 3 on controller 0. 2. $ CR C0 D[0,1,2,3,4] R5 Use this command to create RAID 5 using disk 0, 1, 2, 3, 4 on controller 0. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 99 1. $ DR C0 G0 Use this command to show the firmware version for controller 0. Use this command to delete RAID group 0 on controller 0. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 100 1. $ UF C0 DB393_AES_09580510.BIN Use this command to set alarm mute for controller 0. Use this command to upgrade firmware with bin file “DB393_ AES_09580510.BIN” on controller 0. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 101 1. $ ID C0 D0 Use this command to get the rebuilding percentage of RAID group 0 on Use this command to identify disk 0 on controller 0. controller 0. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 102 Use this command to set the priority value to 1 for RAID group 0 on controller 0. 2. $ RP C0 G0 5 Use this command to set the priority value to 5 for RAID group 0 on controller 0. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 103 Use this command to add spare disk 1 to RAID group 0 on controller 0. Use this command to delete spare disk 1 from RAID group 0 on controller Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 104 When a RAID is created, you still need to go to Disks to create a EX – Exit. partition and mount it to the OS. Description Example: 1. $ EX Use this command exit the program. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 105 There are two reset buttons located at the rear of the bay tray within the chassis. Press the corresponding reset button based on the desired RAID. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 106 Then, separate the inner and outer sliding rails. remove the screws on both sides. (left and right sides). Outer sliding rail Inner sliding rail Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 109 Tighten the inner sliding rail using M4 screws, then repeat the same step to install the inner sliding rail on the other side. M4 screws Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 110 The system installation on rack is completed. the outer sliding rails installed on both sides of the rack, then gently slide the system into the rack. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 111 Outer sliding rail - Left Inner sliding rail - left Outer sliding rail - right Inner sliding rail - right Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 113 Secure the outer rail at the front and rear with M5*18mm screws. The outer rail installation is complete. Once you have completed securing the left outer rail, repeat the same procedure to lock the right outer rail. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 114 (left top circle), to release the latch and engage the rear flush rivet. Pull the rail backward until it clicks into place in the smaller holes. M4 screws Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 115 The inner sliding rail installation is completed. To remove the installed inner rail from system, push the spring clip outward ( ) and then pull it inward ( ) to detach it. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 116 Align the system with both the installed inner rail and the outer rail within the server rack on both sides, then insert the system into the outer rail. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 117 Appendix C: Installing the System in a Rack Toggle the latches on both sides of the outer rails. Insert the system into the rack until it can no longer be pushed in. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...
Page 118 Press the latches on both sides of the inner rails, then push the system that was not completely inserted into the rack in the previous step until it is fully inserted. Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved. NViS 6708 User Manual...

Nexcom NViS 6708 User Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Nexcom NViS 6708

Summary of Contents for Nexcom NViS 6708