ImpOrtaNt INfOrmatION Link ECUs are shipped locked Support options All Link ECUs are shipped locked and must be unlocked There are a range of ways to find information and before they can be used. The ECU can be installed and...
3 lengths of M5 button head cap screws have been - It is recommended that the ECU is rubber mounted in included in in the box to cover most mounting order to isolate the ECU from vibration. scenarios. G5 Voodoo Neo Quick Start Guide – Version 1.0...
- Pin A6 is the ignition switch input. It must be connected to a switched battery source. The ECU will G5 Voodoo Neo 4 and 6 bring ADIO pins to our ECU not power down if A6 is connected to constant VBat.
Page 6
Note: Orientation of pin 1 on the WEiPU connectors is relative to Blue the locator notch in the connector, not the mounted orientation Brown/White Wi-Fi Connector: RP-SMA standard (reverse polarity) Brown GPS Connector: SMA standard G5 Voodoo Neo Quick Start Guide – Version 1.0...
Page 7
DI 1 DI 2 An Volt 3 Ground HB 1 DI 10 DI 9 DI 8 Orange/Purple Orange/Blue Orange/Green Orange/Yellow Grey/Black Grey/Brown Red/Blue Yellow/Black Black * Switched or Constant Switched Power G5 Voodoo Neo Quick Start Guide – Version 1.0...
Page 8
Purple Grey/Green Grey/Yellow Grey/Orange Green White/Yellow White/Green Black Aux 6 CAN2 CAN2 Aux 12 Aux 11 ADIO 2 Ground HB 2 High Purple/White Grey/Purple Grey/White Grey Grey/Blue White/Blue White Yellow/Green Black G5 Voodoo Neo Quick Start Guide – Version 1.0...
Need help?
Do you have a question about the G5 VOODOO NEO and is the answer not in the manual?
Questions and answers