ZyXEL Communications IES-1248 Support Notes page 89

Zyxel ies-1248: user guide

Hide thumbs Also See for IES-1248:

Table of Contents

IES 1248 Support Notes

Please ftp into the DSLAM. Replace the rom-0 with the default rom file by put

command.

c) IES1248

You can set the factory default by CLI command or WEB

WEB:

Please open Maintenance Page. Click the "Restore Default Configuration" link.

It will pop up a dialog to ask for your confirmation. Please click "Ok" button.

Console/telnet:

You can enter the CLI command mode by console or telnet. Type "config restore" to

restore the default settings. Then it will ask for your confirmation. Type "Y" to start

Table of Contents