ZyXEL Communications IES-1248 Support Notes page 66

Zyxel ies-1248: user guide

Hide thumbs Also See for IES-1248:

Table of Contents

Scenario Description:

In this scenario, PCs belong to different divisions within a single corporation

can not communicate with each other, and we left some ports of switches are for

GVRP-aware PC and others are for VLAN-unaware PC. So network administrator

can manage and configure VLAN smartly based on different devices and

requirements.

For switches on floor 1&2, PC connected to port 3 joins VLAN 10 statically,

PC connected to port 4 joins VLAN 20 statically, and PCs connected to port 1&2 can

join VLAN 10/20/30 which determined by its configuration on GVRP-aware NIC

dynamically. For switch on basement, PC connected to port 1 joins VLAN 30 while

PC connected to port 3 can join VLAN10/20/30 dynamically.

Please Note: all clients connected to switches in this scenario should be

located in the same subnet (in this example, the subnet is 192.168.1.0/24)

How to configure this scenario:

1. For Switch A on Floor 2:

Please enter VLAN setting under Advanced Application menu and click "static

VLAN" to bring up the following screen, adding VLAN 10: port 3, fixed, untag;

port 23, fixed, Tx tagging".

IES 1248 Support Notes

Table of Contents