ZyXEL Communications IES-1248 Support Notes page 39

Zyxel ies-1248: user guide

Hide thumbs Also See for IES-1248:

Table of Contents

IES 1248 Support Notes

1.2 Set up IGMP Filtering

If we don't set up IGMP filtering, the subscriber will receive all the movies. We set up

a IGMP filter Profile and apply it to specific port to limit the channels subscriber can

see. Click Basic Setting, xDSL Profiles Setup

in the navigation panel to display

configuration screen as shown. And click the IGMP Filter Profile to show the setup

page.

In this case we only allow the subscriber to join movie 1 and movie 2. That means

only the groups 240.10.10.8 and 240.10.10.9 can be forwarded this subscribed port.

After create this profile, there is a new profile added in the list.

Then we need to apply the profile to port 1. Click Basic Setting, xDSL Profiles

Setup

in the navigation panel to display configuration screen as shown. Click the port

index 1 to set up this port.

Table of Contents