ZyXEL Communications IES-1248 Support Notes page 19

IES 1248 Support Notes
application, we already knew how to set up CPE with one channel (0/33). We
just demonstrate how to set up second channel.
2.1 Menu11.1: Remote Node Profile
In menu11.1, we should activate this profile with "Active= Yes". The Encapsulation
and the Multiplexing are the same as the menu 4. Setting "Edit ATM Options=Yes"
will enter Menu 11.6.
2.2 Menu11.6: Remote Node ATM Layer Options
We should set up another VPI/VCI with 0/34 the same as the IES-1248.
3. ES-2024 settings
3.1 VALN
Click Advanced Application and VLAN in navigation panel to display configuration
screen as shown. Click Static VLAN to show VLAN setup screen.
19
All contents copyright (c) 2006 ZyXEL Communications Corporation.