ZyXEL Communications IES-1248 Support Notes page 45

6. For port 2, set it as non-member of channel 2 "01:00:5e:02:02:02"
7. For port 3, no need to change anything because its status as member of these
channels by default. Don't forget to click "Config Save" to save your configuration
into flash.
CLI Command related:
switch Smcast
show
set
All contents copyright (c) 2006 ZyXEL Communications Corporation.
<adsl port> <multicast
MAC> <join|leave>
IES 1248 Support Notes
Use the static
multicast filter
Display all MAC
addresses joined to
ADSL ports
Use join|leave to
add/remove multicast
45