Related Manuals for Insignia NS-PROJ25
Summary of Contents for Insignia NS-PROJ25
- Page 1 INSTALLATION GUIDE Universal Projector Ceiling Mount NS-PROJ25 Before using your new product, please read these instructions to prevent any damage.
-
Page 2: Table Of Contents
ONE-YEAR LIMITED WARRANTY .........25 Introduction Congratulations on your purchase of a high-quality Insignia product! Your NS-PROJ25 represents the state of the art in projector mount design and is designed for reliable and trouble-free performance. IMPORTANT SAFEGUARDS... -
Page 3: Features
Universal Projector Ceiling Mount • If you are unsure about any part of the installation process, contact a professional contractor or installer for assistance. Improper installation can result in personal injury or damage to the product or your equipment. • The ceiling or mounting surface must be capable of supporting four times the combined weight of the mount and projector. -
Page 4: Dimensions And Mounting Hole Patterns
NS-PROJ25 Dimensions and mounting hole patterns Overall dimensions .59 in. (1.5 cm) 6.3 in. 1.89 in. (4.8 cm) 9.09 in. (16 cm) 8.50 in. (21.6 cm) (23.1 cm) .59 in. (1.5 cm) .39 in. (1 cm) ±25° 13.54 in. (34.4 cm) 6.89 in. - Page 5 Universal Projector Ceiling Mount Dimensions with mounting arms The mounting base with the mounting arms attached should be used for projectors with square or rectangular mounting plates and four holes, with hole distances between 4.29 and 13.54 in. (10.89 to 34.4 cm). It can also be used on projectors with two or three holes, with a distance between the mounting holes of 3.31 to 13.54 in.
-
Page 6: Package Contents
NS-PROJ25 Package contents Parts A - Ceiling plate C - Mounting base Ceiling plate template B - Mounting body D - Mounting arms (4) E - Cable clip Installation Guide Hardware Label Hardware Qty. Label Hardware Qty. M3 x 18 mm screw... -
Page 7: Installation Tools Required (Not Provided)
Universal Projector Ceiling Mount Installation tools required (not provided) Pencil 1/8 in. (3 mm) wood bit Socket wrench (for wood stud ceiling) with 3/8 in. (10 mm) socket 3/8 in. (10 mm) masonry bit (for concrete ceiling) Drill Stud finder (for wood stud ceiling) www.insigniaproducts.com... -
Page 8: Step 1: Option 1 - Mounting On A Drywall Ceiling
NS-PROJ25 Step 1: Option 1 - Mounting on a drywall ceiling You will need Pencil 1/8 in. (3 mm) wood bit (for wood stud ceiling) Socket wrench with 3/8 in. (10 mm) socket Drill A - Ceiling plate G - M6 × 50 lag bolt (2) - Page 9 Universal Projector Ceiling Mount Using a drill and a 1/8 in. (3 mm) drill bit, drill pilot holes in the ceiling, where you placed the pencil marks, to a depth of 2.5 in. (6.35 cm). 1/8 in. (3 mm) wood drill bit Drill Using a socket wrench with a 3/8 in.
-
Page 10: Step 1: Option 2 - Mounting On A Concrete Ceiling
NS-PROJ25 Step 1: Option 2 - Mounting on a concrete ceiling You will need Pencil 3/8 in. (10 mm) masonry Socket wrench bit (for concrete ceiling) with 3/8 in. (10 mm) socket Drill A - Ceiling plate G - M6 × 50 lag bolt (2) - Page 11 Universal Projector Ceiling Mount Insert a concrete anchor (F) into each hole until it is flush with the ceiling, Lightly tap with a hammer, if necessary. Using a socket wrench with a 3/8 in. (10 mm) socket bit, mount the ceiling plate (A) to the ceiling using the two M6 x 50 lag bolts (G).
-
Page 12: Step 2: Assembling The Mounting Body With The Ceiling Plate
NS-PROJ25 Step 2: Assembling the mounting body with the ceiling plate You will need I - 3 mm hex wrench B - Mounting body CAUTIONS: • Make sure that you tighten the mounting body into the ceiling plate sufficiently in order to prevent the equipment from falling and causing possible damage or injury. - Page 13 Universal Projector Ceiling Mount Adjust the mounting body (B) to the direction you want, then tighten the pre-installed locking screws with the 3 mm hex wrench (I). Tip: After adjusting to the appropriate angle, tighten the pre-installed locking screws to prevent your ceiling mount from coming loose and falling.
-
Page 14: Step 3: Attaching Your Projector To The Mounting Base
NS-PROJ25 Step 3: Attaching your projector to the mounting base You will need D - Mounting arms (4) C - Mounting base H - 5 mm hex wrench J - M6 x 12 mm screw (4) L - M3 x 18 mm... - Page 15 Universal Projector Ceiling Mount Attach the mounting base (C) to your projector with four screws (L, M, N, or O) from the hardware provided. Notes: • If you use M3 (L) or M4 (M) screws, use M3/M4 washers (P). If you use M5 (N) or M6 (O) screws, use M5/M6 blue zinc washers (Q).
- Page 16 NS-PROJ25 Attaching the mounting base without arms Attach the mounting base (C) to your projector with four screws (L, M, N, or O) from the hardware provided. Notes: • If you use M3 (L) or M4 (M) screws, use M3/M4 washers (P). If you use M5 (N) or M6 (O) screws, use M5/M6 blue zinc washers (Q).
- Page 17 Universal Projector Ceiling Mount Attaching the mounting base to a projector with irregular mounting holes Attach the mounting arms (D) to your projector with three screws (L, M, N, or O) from the hardware provided. Notes: • If you use M3 (L) or M4 (M) screws, use M3/M4 washers (P). If you use M5 (N) or M6 (O) screws, use M5/M6 blue zinc washers (Q).
- Page 18 NS-PROJ25 Attach the mounting base (C) to the attached arms (D) using an M6 x 12 mm screw (J) and an M5/M6 black zinc washer (K). Do not tighten. Repeat step one to attach the other mounting arms (D) to the mounting base (C), then tighten all securely.
-
Page 19: Step 4: Mounting The Projector
Universal Projector Ceiling Mount Step 4: Mounting the projector You will need H - 5 mm hex wrench J - M6 x 12 mm screw ( CAUTIONS: • Before mounting the projector/mounting base assembly, make sure that all screws are tightened in order to prevent the equipment falling and causing possible damage or injury. - Page 20 NS-PROJ25 Install the M6 x 12 mm screw (J) with the 5 mm hex wrench (H). www.insigniaproducts.com...
-
Page 21: Step 5: Installing The Cable Clip
Universal Projector Ceiling Mount Step 5: Installing the cable clip You will need E - Cable clip Install the cable clip (E) onto the pipe portion of the mounting body (B) by pushing it onto the pipe. Route the projector cables (power and signal) into the cable clip (E). Cable www.insigniaproducts.com... -
Page 22: Step 6: Adjusting Your Projector
NS-PROJ25 Step 6: Adjusting your projector You will need H - 5 mm hex wrench CAUTION: When adjusting, do not completely remove the screws to avoid accidents. • Swivel (directional) adjustments can be made by turning your projector in the direction you want. - Page 23 Universal Projector Ceiling Mount - OR - • You can also adjust your projector angle laterally (side-to-side) by loosening the upper screws on both sides of the mounting base (C), and then adjusting the projector to the angle you want. Make sure you tighten the screws after the adjustment has been made.
-
Page 24: Removing Your Projector From The Mount
NS-PROJ25 Removing your projector from the mount Remove all cables, as necessary. Loosen the screws on both sides of the mount base (C). Remove the mounting base with your projector attached from the hooks on the mount body. Set the projector down on a padded surface somewhere safe, then remove the mounting hardware from it. -
Page 25: One-Year Limited Warranty
Product is determined to be defective by an authorized Insignia repair center or store personnel, Insignia will (at its sole option): (1) repair the Product with new or rebuilt parts; or (2) replace the Product at no charge with new or rebuilt comparable products or parts. - Page 26 REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY FOR BREACH OF WARRANTY. INSIGNIA SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS.
- Page 27 For product inquiries, please contact us with the information below: 1-877-467-4289 www.insigniaproducts.com INSIGNIA is a trademark of Best Buy and its affiliated companies. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2024 Best Buy. All rights reserved.
Need help?
Do you have a question about the NS-PROJ25 and is the answer not in the manual?
Questions and answers