Upgrading The Software From A Tftp Server - Cisco ATA186-I1 Installation And Configuration Manual

About the Software Upgrade Process
Note
Timesaver

Upgrading the Software from a TFTP Server

Cisco ATA 186 Installation and Configuration Guide
6-4
Press 123# to hear your code's version number.
You can later verify that you have upgraded your Cisco ATA 186.
When upgrading many Cisco ATA 186s, you can save the software upgrade
commands in your telephone's speed-dial and use them after accessing the
Cisco ATA 186 voice menu.
You can configure the Cisco ATA 186 to obtain its configuration from a TFTP
server. The configuration file (profile) is unique to each Cisco ATA 186 because
each profile name incorporates the unique MAC address associated with that
Cisco ATA 186. The profile can be configured to instruct the Cisco ATA 186 to
automatically upgrade its firmware image by using TFTP download without user
input.
The profile generation tool and example is available on the Cisco ATA 186
software download page of cisco.com.
To use the TFTP server to upgrade the Cisco ATA 186's software, set the
UPGRADECODE (or UPGRADELANG if you are upgrading the language)
parameter in the Cisco ATA 186's user profile to the following:
3,0x301,0x0400,0x0200,tftp_server_ip,69,n,filename_to_be_downloaded
tftp_server_ip is the TFTP server where you can download
•
file_name_to_be_downloaded
file_name_to_be_downloaded is the name of the TFTP upgrade method
•
firmware image
n is the software image release I.D. in the readme file that came with the
•
TFTP upgrade method firmware image.
Chapter 6 Upgrading the Cisco ATA 186 Software
OL-1267-01