Cisco ATA186-I1 Installation And Configuration Manual page 111

Appendix B Parameters and Defaults
Table B-3 Common Operating Parameters and Defaults (continued)
Parameter
DHCP
DNS1IP, DNS2IP
GkOrProxy
IPDialPlan
OL-1267-01
Value
Type Description
Boolean Can be used to automatically set the IP
address, network route IP, subnet mask,
DNS, NTP, TFTP, and other
parameters. To enable DHCP, set this
value to 1; to disable DHCP, set this
value to 0.
Primary and secondary domain name
server (DNS) IP (if the DHCP server
does not provide one).
Alpha- Gatekeeper or proxy address.
numeric Null-terminated alpha-numeric string
string with up to 31 characters.
For SIP proxy server, this can be an IP
address with or without a port
parameter such as 123.123.110.45,
123.123.110.45.5060, or
123.123.110.45:5061, or a URL such as
sip.cisco.com, or
sip.ata.cisco.com:5061. For IP address,
a '.' or ':' can be used to delimit a port
parameter. For URL, a ':' must be used
to indicate a port31 characters
maximum.
Integer Allows for detection of an IP-like
destination address in the dial plan.
Possible values are:
1: if two '.' are seen, then assume IP
address is entered.
2: if three '.' are seen, then assume IP
address is entered.
Cisco ATA 186 Installation and Configuration Guide
Operating Parameters
IVR Access
Code Default
20 1
DNS1I=91 0.0.0.0
6
DNS2IP=9
17
5 0
310 1
B-11