Compliance Information - Uniden DECT1363 Series User Manual

• Cadmium and Nickel are chemicals known to the State of
California to cause cancer.
• Do not short-circuit the battery.
• The rechargeable Ni-Cd batteries contained in this equipment
may explode if disposed of in a fire.
• Do not charge the battery used in this equipment in any charger other than the
one designed to charge this battery as specified in the owner's manual. Using
another charger may damage the battery or cause it to explode.
• As part of our commitment to protecting our environment and conserving
natural resources, Uniden voluntarily participates in an RBRC
to collect and recycle used Ni-Cd batteries within the United States. Please call 1-
800-8-BATTERY for information on Ni-Cd battery recycling in your area. (RBRC
a registered trademark of the Rechargeable Battery Recycling Corporation.)
Rechargeable batteries must be recycled or disposed of properly.
Uniden works to reduce lead content in PVC coated cords in our
products & accessories.
Warning! The cords on this product and/or accessories contain lead,
a chemical known to the State of California to cause birth defects or
other reproductive harm. Wash hands after handling.

Compliance Information

FCC Part 68 information
This equipment complies with Part 68 of the FCC rules and the require-
ments adopted by the ACTA. On the bottom of this equipment is a label that
contains, among other information, a product identifier in the format US:
AAAEQ##TXXXX. If requested, this number must be provided to the phone
company.
An applicable Universal Service Order Codes (USOC) certification for the jacks
used in this equipment is provided (i.e., RJ11C) in the packaging with each piece
of approved terminal equipment. A plug and jack used to connect this equip-
ment to the premises wiring and telephone network must comply with the ap-
plicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant
telephone cord and modular plug is provided with this product. It is designed to
be connected to a compatible modular jack that is also compliant. See installa-
tion instructions for details.
The REN is used to determine the number of devices that may be connected
16
to a phone line. Excessive RENs on a phone line may result in devices not
industry program
®
is
®