Paging The Parent Unit; Playing Lullabies - VTech 80-102200 - Crystal Sounds DECT Digital Monitor User Manual

indicators light up on the parent unit.
1. As long as the baby unit does not detect a sound, the sound level
indicators on the parent unit will not be lit.
2. When the baby unit picks up a sound, one or more sound level
indicators light up on the parent unit. The number of sound level
indicators that light up corresponds to the loudness of the sound
picked up by the baby unit.
3. For silent baby monitoring, when the baby unit picks up a high
volume of sound, all 5 sound level indicators will light up and the
parent unit will beep as a sound alert.

Paging the Parent Unit

If you have misplaced the parent unit, you can use the PAGE button
on the baby unit to locate the parent unit.
Note: The paging function only works when the parent unit is on.
1. Press the PAGE button on the baby unit. The parent unit will emit
a paging alert tone.
2. To stop the paging alert tone, press the PAGE button again, or
press any button on the parent unit.

Playing Lullabies

1. When there is no lullaby playing, press the lullaby button or
the play/stop button on the baby/parent unit to start playing
lullabies.
2. Press the play/stop button again to play or stop a lullaby.
3. Press the lullaby button to skip to the next lullaby.
4. Press +/- buttons on baby unit to adjust lullaby volume.
Note:
•
The lullabies will play continuously for approximately 15 minutes. To
preserve battery life, the unit will automatically stop playing lullabies after
approximately 15 minutes without input. To reactivate the lullabies, press
the lullaby button or play/stop button.
• The lullaby volume on the baby unit cannot be changed using the parent
unit.
15