Positioning And Operating Range - VTech 80-102200 - Crystal Sounds DECT Digital Monitor User Manual

Dect digital monitor
Table of Contents

Advertisement

Note:
• When you charge the parent unit for the first time or after a long
period of non-use, turn it off and let it charge continuously for at
least 10 hours.
• Charging normally takes 12-14 hours, but it takes longer when
the parent unit is on while charging. To keep the charging time as
short as possible, turn off the parent unit during charging.
• When the battery power is fully charged, the parent unit can be
used cordlessly for about 24 hours.
• After a long period of non-use, recharge the parent unit before
using.
Battery level indication
1. The light will flash when the parent unit
batteries are low.
2. The light will be off when the parent unit
batteries have sufficient charge.
3. The light will be on steadily when the parent
unit is being charged.

Positioning and Operating Range

Positioning the Baby Monitor
Place the baby unit at least 3 feet away from your baby. Place the
parent unit within the operating range of the baby unit. Make sure
the parent unit is at least 3 feet away from the baby unit to avoid
acoustic feedback.
Operating Range
The operating range of the baby monitor is about 1000 feet in
open air. Depending on the surroundings and other interfering
factors such as walls, doors and ceilings, the range may be shorter.
Indoors, the operating range is up to 150 feet.
LINK
Low
battery
LINK
Full
battery
LINK
Charging
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Crystal sounds dect digital monitor

Table of Contents