62
Using Restore
Where to Restore
You'll usually want to restore files to the same place from which you backed
them up. However, if you want to restore your files to a different location, use
the Where to restore box. The following selections are available:
Original Location—All files and folders are restored to the same path from
which they were backed up. This is the default setting.
Alternate Location—All files and folders are restored using the original tree
as backed up, but the root of the tree is set to the specified path.
Single Directory—All files and folders are restored to a single folder,
specified in the path text box.
To restore your files to an alternate location:
1. Select Alternate Location from the Where to restore list.
2. Type a path into the text box.
Or,
Click Browse, select a folder in the list, then click OK. The folder appears in
the text box.
To restore your files to a single folder:
1. Select Single Directory from the Where to Restore drop-down list box.
2. Type a folder (directory) name into the text box.
Or,
Click Browse, select a folder from the list, then click OK. The folder appears
in the text box.
How to Restore
Restore options lets you choose how to treat files in your backup set with the
same name as those on your hard drive.
To set your restore options:
1. Click Options in the Restore window.