HP C4405A - Colorado 14GB Tape Drive User Manual page 55

Caution: Restoring the Registry may cause serious problems if your
hardware configuration has changed since you last backed up
the Registry.
If your system's hardware configuration and system settings have not
changed since the last backup of the registry, click Yes to restore the
Windows Registry.
The entire registry will be restored along with all selected local drives.
Or,
If your system's hardware configuration has changed, (i.e. you've added a
new drive or changed the IRQ settings on a card) click No when prompted
to restore the hardware and system settings in the registry. Only those
portions of the registry containing your software settings and configuration
will be restored along with all selected local drives.
6. When the restore is complete, you are prompted to reboot your computer.
Click Yes to reboot (recommended).
7. Restore any New and Changed Files backup sets using step 3 and 4.
For Windows NT
1. Install and configure HP Colorado Backup II. See
HP Colorado Backup II on page
2. Collect the media containing your most recent All Selected Files and your
New and Changed Files backups. Which backup sets you'll need to restore
depends on your backup strategy.
If you performed:
All Selected Files only—restore only your most recent backup set.
All Selected Files and Differential New and Changed Files—restore your All
Selected Files backup first, then restore the most recent Differential backup
set.
All Selected Files and Incremental New and Changed Files—restore your All
Selected Files backup first, then restore each of the Incremental backups
sets in order, starting with the oldest.
3. Restore the All Selected Files backup set. Make the following option
selections on the Restore window:
Restoring All Your Files
Installing
10.
55