The correct sequence of the 4 security PIN digits needs to
be detected before entering remote access mode. Random
digits detected prior to the correct 4 digits sequence are
ignored, and answering machine recording continues until
the complete PIN is detected. There is no system prompt to
enter the remote access code.
Press the following keys on your handset to perform the
following functions, after entering your remote access mode.
Skip forward to the next message
Toggle Answer Off/Announce Only/Announce
and Record modes
Listen to the Main Menu (for Full Voice
3.27.10 Set the security code
This is used to change the remote access PIN if necessary.
1. Press MENU and then VOL+ or REDIAL/VOL- to select
2. Press MENU and then VOL+ or REDIAL/VOL- to select
3. Press MENU and then enter the 4-digit security code.
4. Press MENU to save.
Using the phone