Advertisement
Quick Links
Advertisement
Related Manuals for Fortinet FortiGate FG-4800F-DC
Summary of Contents for Fortinet FortiGate FG-4800F-DC
- Page 1 QuickStart Guide FortiGate 4800F Series FG-4800F, FG-4801F, FG-4800F-DC, and FG-4801F-DC...
- Page 2 Fortinet. For absolute clarity, any such warranty will be limited to performance in the same ideal conditions as in Fortinet’s internal lab tests.
- Page 3 1x Console Cable contact FortiCare Support at https://www.fortinet.com/support/contact Self-service Resources Access our knowledge base, forums, videos and technical experts at https://www.fortinet.com/support/support-services/forticare-support Thank you for choosing Fortinet 6x Rubber Feet 2x SFP+ Transceivers 1x Rail Kit 1x Grounding Lug 4x DC Power Cables...
- Page 4 Scan QR Code to Follow the on-screen Install instructions Note: For a detailed CLI guide, visit docs.fortinet.com Note: Enable Bluetooth on your mobile device for BLE or connect your mobile’s USB cable into the device MGMT Management Computer Ethernet Cable Note: Configure the management computer with IP 192.168.1.x and...
- Page 5 SFP Modules Desktop Installation Installation 1.5in 1.5in Cage Socket 1.5in 1.5in Note: Place the device on a flat, clean and stable surface. Removal Cage Socket Lock...
- Page 6 Rail Installation Attach the Inner Rails to the Appliance 1. Detach the inner rail from the rail assembly by pressing the lock out tab 2. Place an inner rail against a side of the appliance 3. Align the inner rail keyholes with the appliance pins 4.
- Page 7 Install the Appliance Attach the Outer Rails to the Rack Safety Precautions Front Outer Rail 1. Check that the inner rails are secured to the appliance 1. Place an outer rail against a side of the rack 2. Align the front outer rail with the front of the rack 2.
- Page 8 FG-4800F Series Front FortiGate 4800F MGMT1 AUX1 CONSOLE MGMT2 AUX2 SFP56 QSFP56 QSFP-DD BLE Button Activates BLE management or restores to factory default Blue: BLE connected Flashing Blue: BLE in discovery Off: BLE not connected Ports HA1, HA2, AUX1, and AUX2 STATUS Green: Connected at 50/25/10/1 Gbps Green: Normal operation...
- Page 9 FG-4800F Series Rear FAN1 FAN2 FAN3 SSD1 SSD2 CAUTION/ATTENTION SHOCK HAZARD. DISCONNECT ALL POWER SOURCES. RISQUE D’ÉLECTROCUTION. DÉBRANCHEZ TOUTES LES SOURCES D’ALIMENTATION. AC Power Supplies 200-240VAC, 7-6A, 50/60Hz (x4) 2+2 Redundant, hot-swappable power supplies Power Supply LED Indicators Green: Standby rail and main output on Green: Standby rail and main output off Flashing Amber: Main output or fan error detected...
- Page 10 FG-4800F-DC Series Rear FAN1 FAN2 FAN3 SSD1 SSD2 CAUTION/ATTENTION SHOCK HAZARD. DISCONNECT ALL POWER SOURCES. RISQUE D’ÉLECTROCUTION. DÉBRANCHEZ TOUTES LES SOURCES D’ALIMENTATION. DC Power Supplies (2+2) -48V to -60V DC, 32A-42A (x2), hot-swappable DC PSU LED Status Green: Power supply operating normally Flashing Green: DC power detected Amber: Power output is off...
- Page 11 Cautions and Warnings This product has a separate protective earthing terminal provided on the back of the product in addition to the grounding terminal of the attachment plug. This separate protective earthing terminal must be permanently connected to earth with a green with yellow stripe conductor minimum size # 6 AWG and the connection is to be installed by a qualified service personnel.
- Page 12 EU or countries that have implemented the EU Directives and/or spectrum regulation. Any Fortinet products not obtained directly from Fortinet or Fortinet’s authorized partners may not comply with EU Directives and Fortinet 請仔細閱讀以下說明...
- Page 13 Fortinet.com...
Need help?
Do you have a question about the FortiGate FG-4800F-DC and is the answer not in the manual?
Questions and answers