Advertisement
Quick Links
Advertisement
Related Manuals for Nvidia SN2201
Summary of Contents for Nvidia SN2201
- Page 1 SN2201 1U Ethernet Switch Systems Quick Installation Guide...
- Page 2 Table of contents Table of contents Installation and Con guration Installation and Con guration SN2201 1U Ethernet Switch Systems Quick Installation Guide...
- Page 3 1 x Rail kit for 23.6-31.5" [600-BOOmm) racks 2 x Power cables - Type C13 -C14 1 x Harness: RS232 2M cable - RJ-45 to 089 1 x RJ to RJ Cable Quantity Item SN2201 1U Ethernet Switch Systems Quick Installation Guide...
- Page 4 Quantity Item Rail-Kit Package Content: 2xA 2xB 2xC If anything is damaged or missing, contact your NVIDIA representative at enterprisesupport@nvidia.com. SN2201 1U Ethernet Switch Systems Quick Installation Guide...
- Page 5 Standard Installation: The inner rails should be assembled to the switch using the rst ve holes (from its front side). SN2201 1U Ethernet Switch Systems Quick Installation Guide...
- Page 6 Install the outer rails (B+C) in the rack, as shown in the following illustration: Mount the chassis onto the rack 1. Insert the chassis into the middle-outer rails installed in the rack (C). SN2201 1U Ethernet Switch Systems Quick Installation Guide...
- Page 7 (The following diagram is for general illustration; the rear view does not necessarily match that of the actual system). Tool-Less 2-Post Mounting Rail-Kit Note SN2201 1U Ethernet Switch Systems Quick Installation Guide...
- Page 8 Attach the two brackets (A) to the device, using the M4 screws (B) provided in the mounting kit, according to your installation selection: Note The 2-post mounting installation may cause sinking of the switch. Rear end sag is around 6-8mm. Standard Installation: Middle rack Installation: SN2201 1U Ethernet Switch Systems Quick Installation Guide...
- Page 9 The cable retainer should be used to secure the cable when installing the system. To secure the power cord inside the retainer, press the small tab on the retainer strip to loosen the loop. System Interfaces Connector (Front) Side FRU (Rear) Side SN2201 1U Ethernet Switch Systems Quick Installation Guide...
- Page 10 * It may take up to ve minutes to turn on the system. If the System Status LED shows amber after ve minutes, unplug the system and contact your NVIDIA representative. LED Assignments Symbol Description Normal Status System health Green/Flashing...
- Page 11 Customer should obtain the latest relevant information before placing orders and should verify that such information is current and complete. NVIDIA products are sold subject to the NVIDIA standard terms and conditions of sale supplied at the time of order acknowledgement, unless otherwise agreed in an individual sales agreement signed by authorized representatives of NVIDIA and customer (“Terms of Sale”).
- Page 12 NVIDIA accepts no liability related to any default, damage, costs, or problem which may be based on or attributable to: (i) the use of the NVIDIA product in any manner that is contrary to this document or (ii) customer product designs.
Need help?
Do you have a question about the SN2201 and is the answer not in the manual?
Questions and answers