What Next - HP 330834-B21 - StorageWorks Ultrium 460 Tape Library Drive Module Technical Reference Manual

What Next?

20 HP (Compaq) Tru64 UNIX
Data.UBYTE[2]
Data.UBYTE[3]
Rebuild the kernel by running
2
system with the tape drive attached. The device files for the Ultrium drive
will be generated in
The names of the device files can be interpreted as follows:
3
Devices in the
/dev/ntape
will do a rewind on close.
/dev/tape
The device files then have the syntax:
For example,
/dev/ntape/tape66_d1
no-rewind using density number 1. Since all density numbers have the
same parameters it does not matter which density number file is used.
Once the device files have been created, you should confirm that your new
tape drive is working properly.
provides instructions on backing up and restoring a sample file to test your
installation.
= 0x01
= 0x00
/sbin/ddr_config
/dev/tape and /dev/ntape
directory are "no-rewind" devices. Those in
tapeX_dn
Chapter 7, "Verifying the Installation"
, then reboot the
when you reboot.
is a device file for device 66,