Revision History - HP 330834-B21 - StorageWorks Ultrium 460 Tape Library Drive Module Technical Reference Manual

Version
Edition 1 Feb 2001
Edition 2 Mar 2002 Reordering. Removal of pass-through functionality. Changes to HP
Edition 4 Jun 2002
Edition 5.1 Jul 2003
2
Notice
The information contained in this
document is subject to change
without notice.
Hewlett-Packard makes no
warranty of any kind with regard
to this material, including, but not
limited to, the implied warranties of
merchantability and fitness for a
particular purpose. Hewlett-Packard
shall not be liable for errors
contained herein or direct, indirect,
special, incidental or consequential
damages in connection with the
furnishing, performance, or use of
this document.

Revision History

Date
All
chapter (update of ioscan output, use of sam to add stape and device
files), Linux chapter (use of sam to add device files), Sun chapter (using
seek and tell), verification chapter (<archive name> changed to <device
file>
Updated for Generation 2 Ultrium drives. Now only includes supported
and tested platforms. Extra information added to HP-UX, Sun and Linux
chapters.
Generation 2 SCSI and FC drives only. Support for Silicon Graphics
removed. Other minor changes.
This document is frequently revised and updated. To find out if there is a
later version, please ask your HP OEM Representative.
This document contains proprietary
information which is protected by
copyright. All rights reserved. No
part of this document may be
photocopied, reproduced or
translated to another language
without the prior written consent of
Hewlett-Packard.
© Copyright 2001–2003 by
Hewlett-Packard Limited
Changed Pages