HP 330834-B21 - StorageWorks Ultrium 460 Tape Library Drive Module Technical Reference Manual page 33

Parameter Value
<no. of 4
densities>
<density n> 0x00
or
<density 3> 0x40
0x42
<default 3
density>
<X timeout>
Device knows when end of data has been reached.
0x0200
Device driver is unloadable.
0x0400
Time-outs five times longer than normal.
0x1000
Driver buffers write requests and pre-acknowledges success to
0x4000
application.
Variable record size not limited to 64 KB.
0x8000
Solaris 9 only:
0x10000
the device supports for selecting or deselecting compression.
So indicates variable record length,
0xd639
timeouts for erase, EOD recognition, Unloadable device driver, 5 x longer
timeouts, buffer writes and pre-acknowledge sucess, variable records not
limited to 64 KB, and, for Solaris 9 only:
compression.
SELECT
There are four densities following in the parameter list.
Creates a device file with compression disabled.
The density code for data compression enabled by default.
Density 3 ( ) is the default for Generation 2 drives.
0x42
All timeouts are in seconds
Values for the parameters for
Parameter Value
target X
X
Specifies the LUN for the device.
lun 0
Meaning
Device determines which of the two mode pages
and
bsf
auto-density over-ride and
are as follows:
name
Meaning
specifies the SCSI ID (target) of the device.
Sun Systems, Solaris (SunOS 5.x) 33
enabled, long
bsr
MODE