Customer Service Team for assistance. We are confident you will enjoy working with your Kress product for years to come. INTENDED USE This machine is intended for cutting and trimming hedges and bushes in light and heavy commercial use.
COMPONENT LIST LOCKING SWITCH FOR ROTATING REAR HANDLE THROTTLE TRIGGER ROTATING REAR HANDLE SPEED CONTROL BUTTON ON/OFF SWITCH FRONT HANDLE OPERATOR PRESENCE SWITCH (ALL AROUND SWITCH FUNCTION) SAFETY GUARD BLADE TIP GUARD REAR BLADE GUARD METAL GEAR BOX BLADE SHEATH BATTERY PACK * BATTERY-RELEASE BUTTON * Not all the accessories illustrated or described are included in standard delivery.
PRODUCT SAFETY 3. Personal safety a) Stay alert, watch what you are doing and GENERAL POWER TOOL use common sense when operating a power tool. Do not use a power tool while you are SAFETY WARNINGS tired or under the influence of drugs, alcohol or medication.
for misalignment or binding of moving parts, HEDGE TRIMMER SAFETY breakage of parts and any other condition WARNINGS: that may affect the power tool’s operation. If damaged, have the power tool repaired before a) Do not use the hedge trimmer in bad weather use.
Page 7
Recharge only with the charger specified by Kress. Do not use any charger other than that specifically provided for use with the Warning equipment. l) Do not use any battery pack which is not designed for use with the equipment.
Batteries may enter water cycle if disposed improperly, which can be hazardous for ecosystem. Do not dispose of waste batteries as unsorted municipal waste. Li-Ion battery This product has been marked with a symbol relating to ‘separate collection’ for all battery packs and battery pack.
Page 9
OPERATION: Starting and Stopping Before usage, remove the Blade Sheath first. (See Fig. D1) Testing the trimmer and battery (See Fig. C) Checking the controls Operator Presence Switch and Throttle Trigger Choosing speed 1. Remove the battery. 2. Press and release the Throttle Trigger and 1.
Page 10
Release the Throttle Trigger and Operator Presence Switch to stop. (See Fig. D4) 90° 45° 135° 0° How to Use your Hedge trimmer Before cutting an area, inspect it first and remove When the machine is not in use, turn the hedge any foreign objects that could become thrown or trimmer off and remove the battery pack or entangled in the blades.
TRANSPORTATION Transporting the trimmer 1. Switch off the trimmer and remove the battery. 2. When transporting your trimmer by hand, hold the middle of front handle to make sure that your machine is parallel to the ground. 3. When transporting your trimmer in a vehicle, secure and position it to prevent movement or damage.
Remove the screws from the gear box cover, and remove the cover. Lubricating after every 300 hours operation. NOTE: For best operation and longer lifetime, lubricate the hedge trimmer gear case with the grease (SHELL Gadus S2 V220 1). CLEANING 1.
them in the normal trash can. Also do not dispose Excessive Cutting Replace cutting of the battery with the machine. Remove the used vibrations/ attachment attachment. battery pack from the appliance and dispose of it noise. issue. Contact Service at the nearest or convenient dedicated recycling Machine Agent.
Page 14
SUGGESTED BATTERIES AND CHARGERS Battery Capacity Charger Amperage KAC800 4 Ah KAC810 (With 11 Ah KAC840 30 A Backpack Harness) KA3000 2.0 Ah We recommend that you purchase your accessories from the same Dealer that sold you the tool. Refer to the accessory packaging for further details.
Need help?
Do you have a question about the KC201.9 and is the answer not in the manual?
Questions and answers