Operation - Gardena WT 1030 Operating Instructions Manual

G
Installing the anti-theft To protect your Water Timer against theft, the GARDENA Anti-
protection (optional) : Theft Protection Art. No. 1815-00.791.00 is available from the
GARDENA Service.
1. Fasten the bracket
the screw
8
2. The bracket can be used to attach a chain, for example.
The screw cannot be loosened once it has been screwed in.
7

5. Operation

Setting the watering program : The Water Timer control unit
you to set the watering program somewhere other than where
the Water Timer is to be used.
The time of day and watering starting time are entered to the
nearest hour.
1. Turn the control knob to OFF and confirm by pressing the
OK button.
The program stored in the memory is overwritten.
1. The Time LED flashes.
8
7
to the back of the Water Timer using
8
.
2
can be removed. This allows
Setting the time of day :
2. Set the time on the inner light-grey scale by turning the con-
trol knob and confirm the time you have selected by pressing
the OK button (e.g.: 10:00 am).
The Start Time LED flashes.
2.
Setting the watering starting time :
3. Set the watering starting time on the inner light-grey scale by
turning the control knob and confirm the time you have selected
by pressing the OK button (e.g.: 20:00).
3. The Frequency LED flashes.
Setting the Watering Cycle :
4. Set the watering cycle on the outer grey scale (Frequency
Hours / Days) using the control knob and confirm your selection
by press-ing the OK button (e.g.: 12 hour cycle).
The Run Time LED flashes.
4.
G
9