Page 1
OWNER’S MANUAL BAR HEIGHT MARBLE TOP FIRE PIT MODEL #AFP-BAR-MAR AZPH-AS Precaution! The Powder Coating paint process has become the most ARNING common widely used application in the outdoor furniture category. Unfortunately powder coating is extremely sensitive to Humidity and Moisture. A simple process to protect your furniture, especially flat surfaces is to apply a simple coat of good quality car wax prior to using.
PACKAGE CONTENTS Fire Glass Side Panel (Left) Side Panel (Right) Wind Screen Side Panel (Back) Table Door (Left) Door Bracket Door (Right) Front Bracket Post (Left) Pvc Cover Back Bracket Post (Left) QUANTITY Fire Glass (One Pack) Wind Screen w/ clamps(8) Table Back Bracket Post (Right) Door Bracket...
SAFETY INFORMATION DANGER DANGER • EXPLOSION - FIRE HAZARD • CARBON MONOXIDE HAZARD • Keep solid combustibles, such as building materials, • This fire pit is a combustion appliance. All combustion paper or cardboard, a safe distance away from the appliances produce carbon monoxide (CO) during the fire pit as recommended by the instructions.
SAFETY INFORMATION WARNIN G WARNING California Proposition 65 • This product is fueled by propane gas. Propane gas Combustion by-products produced when using is invisible, odorless, and flammable. An odorant is this product contain chemicals known to the State normally added to help detect leaks and can be of California to cause cancer, birth defects, and described as a “rotten egg”...
Page 6
ASSEMBLY INSTRUCTIONS 1. Place the Side Panel(K&M&L) Connecting all table legs(F&G&H&I) ,Attach it with 12pcs screws(BB)and 12pcs M6 washers(DD), using the Screwdriver(EE). DDX12 BBX12 Hardware Used screwM6x12 Qty.12 washer Φ6 Qty.12 Screwdriver Qty.1 2.(1)Assemble the (F)Front Bracket Post (Left)&(I)Front Bracket Post (Right) Connecting (J)Bottom plate ,Attach it with 2pcs screws M6x35(AA)and 2pcs M6 washer(DD), using the Screwdriver(EE).
Page 7
ASSEMBLY INSTRUCTIONS 3. (E)Door Bracket onto the (F)Front Bracket Post (Left)&(I)Front Bracket Post (Right).secure them with 4pcs screws M6x12 (BB) using the Screwdriver(EE). BBX4 Hardware Used screw M6x12 Qty.4 Screwdriver Qty.1 4. Assebmle the (N)Door (Left)&(O)Door (Right) to the (J)Bottom plate .Please see the picture on the right...
Page 8
ASSEMBLY INSTRUCTIONS 5. Secure the left and right doors to the CCX2 door bracket,using 2 pcs screws M6x30 (CC) and the Screwdriver(EE). Hardware Used screw M6x30 Qty.2 Screwdriver Qty.1 6. Attach the assembled base to the bottom of top using 4pcs M6x12 screws (BB), and 4pcs M6 BBX4 washers(DD), using the Screwdriver(EE).
Page 9
ASSEMBLY INSTRUCTIONS 7. Assembly the wind screen with clamps and place onto the fire table. 8. Put glass (one pack) (A) above the burner and put the lid above the burner assembly. Please Note Do not surround the striker box with fire glass - keep 1/4"...
Page 10
ASSEMBLY INSTRUCTIONS 9. Connect hose and regulator to cylinder. The propane gas and cylinder are sold separately. Use a standard 20 lb. propane cylinder only. Use this heater only with a propane vapor withdrawal supply system. See chapter 5 of the standard for storage and handling of liquefied petroleum gas, ANS/NFPA 58.
Page 11
ASSEMBLY INSTRUCTIONS The knob on the LP tank must be closed. Make sure that the knob is turned clockwise to a full stop. The cylinder supply system must be arranged for vapor withdrawal. Check that the control knob on the control unit is turned off.
Page 12
OPERATION INSTRUCTIONS Leak Check WARNING • Perform all leak tests outdoors. • Extinguish all open flames. • NEVER leak test when smoking. • Do not use the heater until all connections have been leak tested and do not leak. Hose / Regulator connection Regulator / Cylinder connection...
Page 13
OPERATION INSTRUCTIONS D ANGER WARNING Very hot while in a operation! • CARBON MONOXIDE HAZARD Never lean over the fireplace while in use. • For outdoor use only. Never use inside house, or other Do not touch tile of spark guard while the fire pit is in unventilated or enclosed areas.
Page 14
OPERATION INSTRUCTIONS WARNIN G FOR YOUR SAFETY Be careful when attempting to manually ignite this fire pit. Holding in the control knob for more than 10 seconds before igniting the gas will cause a ball of flame upon ignition. When fire pit is ON: Burner will display tongues of blue and yellow flame.
OPERATION INSTRUCTIONS 9. Fire pit is away from gasoline or other flammable liquids or vapors. 10. Fire pit is away from windows, air intake openings, sprinklers and other water sources. 11. Fire pit is at least 24 in. on rear and at least 24 in. on sides from combustible materials. 12.
Page 16
CARE AND MAINTENANCE Gas odor with extreme yellow tipping of flame. Fire pit does NOT reach the desired temperature. Fire pit glow is excessively uneven. Fire pit makes popping noises. Spiders and insects can nest in burner or orifices. This dangerous condition can damage fire pit and render it unsafe for use.
TROUBLESHOOTING CUSTOMERS IN USA For small parts please call 1-888-775-1330 for assistance. For damaged product, you may have to return to the retailer. PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Cylinder valve is closed Open valve Clean or replace orifice or Blockage in orifice or pilot tube pilot tube Open gas line and bleed it Pilot won’t light...
RETURN POLICY NOTE: Please carefully review the following terms regarding returns. If you have any questions regarding returns, please call 1-888-775-1330 for assistance. Purchased through an online retailer: Please contact retailer for any and all returns. AZ Patio Heaters, LLC offers a 30-Day Return Policy on Patio Heaters, Parts and Accessories as specified in the conditions below when purchased directly.
Page 19
RETURN POLICY How Do You Return A Product? If you wish to return an item that qualifies for a return as specified above, please call us at 1-888-775-1330 to receive a return authorization number, instructions for sending the item back, and an address for the return. A return authorization number is required to return a product.
Page 20
RETURN POLICY For credit card purchases We will credit back only to the same credit card that was used for the original purchase. Credits or Refunds will be issued within 10 days of receipt of the authorized return. Merchandise must be in original condition, with all packing materials, manual, and other original components intact, in the original packaging.
ONE-YEAR LIMITED WARRANTY CUSTOMERS IN USA For small parts please call 1-888-775-1330 for assistance. For damaged product, you may have to return to the retailer. CUSTOMERS IN CANADA Only return this product to the store if it was purchased within 90 days. If you have problems after 90 days of purchase, please CALL 1-888-775-1330.
Need help?
Do you have a question about the Premium Series and is the answer not in the manual?
Questions and answers