HOMCOM 820-007 Assembly Instruction Manual page 9

6. Timer switch
"TIMER ON/OFF" is to control the timed opening and closing.
Restart the machine after power is cut off, the original setting is kept, but the current date
and time must be reset.
Note 1: When the week timer is power on, you should turn on the heating function, or else
when the machine is working again, there will be only the flame effect working.
Safety Cut-Off
This appliance is fitted with a safety cut-off which will operate if the fire overheats (e.g.
due to blocked air vents). For safety reasons, the fire will NOT automatically reset.
To reset the appliance, disconnect the appliance from the mains supply for at least 15
minutes. Reconnect to the mains supply and switch on the appliance.
Troubleshooting
Symptom
No operation/ no fan.
No fire effect light.
Cleaning and Maintenance
Warning- Always disconnect from the mains supply before cleaning heater.
For general cleaning use a soft clean duster - never use harsh abrasive or cleaners.
The glass viewing screen should be cleaned carefully with a soft cloth. DO NOT use
proprietary glass cleaners.
This product does not use a standard bulb for its flame effect. The appliance uses an
electronically controlled LED system to create the effect, therefor no parts need to be
replaced. There are no user-serviceable parts on this appliance. Under no
circumstances should the appliance be serviced be anyone other than a qualified
electrician.
Disposal
At the end of the product's serviceable life, it should be disposed of thoughtfully
and safely in accordance with local authority regulations. The plug should be
Removed from the power supply cord and the power cord cut from the heater
Technical Specification
820-007:
Supply: 220-240V~ 50Hz
Rated power: 2000W
Lighting: LED bulbs (no replaceable parts)
820-054:
Supply: 220-240V~ 50Hz
Rated power: 1800W
Lighting: LED bulbs (no replaceable parts)
Solution
Check if put the electric plug into the
socket.
Check for safety cut-off operation.
Check the LED system by qualified
electrician.
9