Connecting Speakers And Subwoofers - Yamaha RX-A1000 Owner's Manual

Connecting speakers and subwoofers

Connect your speakers to their respective terminals on the rear panel.
CAUTION
• Remove the power cable of this unit from the power outlet before connecting the speakers.
• Generally speaker cables consist of two parallel insulated cables. One of these cables is a different color, or has a line running along it, to indicate different polarity. Insert the different colored (or lined) cable into the "+"
(positive, red) terminal on this unit and the speakers, and the other cable into the "–" (negative, black) terminal.
• Be careful that the core of the speaker cable does not touch anything or come into contact with the metal areas of this unit. This may damage this unit or the speakers. If the speaker cables short circuit, "CHECK SP
WIRES!" will appear on the front panel display when this unit is switched on.
■ Front/Center/Surround/Surround back speaker and
Subwoofer connection
When connecting only one surround back speaker, connect the
speaker to the SURROUND BACK L (SINGLE) jacks.
Subwoofer Front speaker
R
HDMI
AV 2 AV 3 AV 4 AV 5 AV 6 AV 7
D/DVD)
COMPONENT VIDEO
P Y AV 3 P C P
R B R
REMOTE
MONITOR OUT/ZONE OUT
Y P P
B R IN OUT
AV 4 D
MULTI CH INPUT
ZONE OUT PRE OUT (SINGLE)
CENTER
2
SURROUND SUR. BACK SUBWOOFER ZONE 2 FRONT SURROUND SUR. BACK SUBWOOFER CENTER
SPEAKERS
SURROUND SURROUND BACK/ CENTER FRONT
BI-AMP
SINGLE
R L R L
Surround Surround back Center speaker
speaker speaker
■ Presence speaker connection
When using the presence speakers, connect the speakers to the
EXTRA SP jacks as shown in the diagram below.
L
RS-232C
TRIGGER
OUT
1
2
+12V 0.1A MAX.
ZONE2/ZONE3/
F.PRESENCE
EXTRA SP
Presence speaker
R L
RS-232C
AV 7
TRIGGER
OUT
1
2
+12V 0.1A MAX.
ENTER
AC IN
FRONT ZONE2/ZONE3/
F.PRESENCE
EXTRA SP
CONNECTIONS
Connecting speakers
The presence speakers (PL/PR) that output front effect sounds can
be connected to this unit. With the sound programs
sound with a richer and more spatial presence can be created.
0.5 – 1 m 0.5 – 1 m
PL
L
1.8 m
Connection of presence speakers is recommended to take full
advantage of the effects of CINEMA DSP sound programs.
(☞p. 51),
PR
R
1.8 m
Continues to the
next page
19
En