Avoiding Crossing Remote Control Signals When Using Multiple Yamaha Receivers; Changing Fm/Am Frequency Steps (Asia And General Models Only); Initializing Various Settings For This Unit - Yamaha RX-V467 Owner's Manual

TRANSMIT CODE SET
n
Avoiding crossing remote control
SOURCE RECEIVER
SLEEP
signals when using multiple
HDMI
1 2 3 4
AV
Yamaha receivers
1 2 3 4
AUDIO
5 6 1 2
V-AUX [ A ] [ B ] DOCK
TUNER
REMOTE ID -ID1
FM AM
PRESET TUNING
INFO MEMORY
The remote control of the unit can only receive signals
ENHANCER SUR. DECODE
MOVIE MUSIC STEREO
from a receiver which has an identical ID (remote
STRAIGHT DIRECT
control ID). When using multiple Yamaha AV receivers,
SCENE
BD you can set each remote control with a unique remote
TV CD RADIO
DVD
SETUP OPTION control ID for its corresponding receiver.
i
On the contrary, if you are setting the same remote
ENTER VOLUME control ID for all receivers, you can use one remote
RETURN
DISPLAY control to operate 2 receivers.
TOP POP-UP
MUTE
MENU MENU
ID1 (Default)
REC
ID2
1 2 3 4
l
5 6 7 8
9 0 10 ENT
TV
ID1 is set for both remote control and receiver by
INPUT
TV VOL TV CH
default. To avoid crossing remote control, change the
MUTE
remote control ID for both remote control and
receiver.
i
SETUP
l
Numeric keys
n
CODE SET
J
1 : For details on setting FM/AM frequency steps, refer to "FM/AM
tuning" (☞p.
Receives the remote control signals set in
ID1.
Receives the remote control signals set in
ID2.
34).
Extended functionality that can be configured as needed (Advanced Setup menu)
■ To change the remote control ID
Perform each of the following steps within
1 minute. Settings will be automatically stopped if
more than 1 minute passes since the last operation.
To reset, repeat from step 1.
nCODE SET
Press on the remote control
1
using a pointed object such as the tip of a
ballpoint pen.
iSETUP
2 Press on the remote control.
Enter the desired remote control ID code.
3
To switch to ID1:
l
Enter "5019" using Numeric keys.
To switch to ID2:
l
Enter "5020" using Numeric keys.
Once the remote control code is registered
successfully the remote control will blink twice.
Registration successful: blinks twice
Registration failed: blinks 6 times
TRANSMIT CODE SET
SOURCE RECEIVER
SLEEP
HDMI
• If setup fails, repeat from step 1.
• Returns to ID1 after the remote control code is
initialized (☞p. 64).
SETUP
Changing FM/AM frequency steps
(Asia and General models only)
TU - AM9/FM50
You can select one of the following FM/AM frequency
J1
steps:
AM10/FM100
You can adjust the AM frequency by
steps of 10kHz and FM by steps of
100kHz.
AM9/FM50
You can adjust the AM frequency by
(Default) steps of 9kHz and FM by steps of 50kHz.
Initializing various settings for this
unit
INIT- CANCEL
Initializes various settings stored in this unit and sets it
back to default.
Select the items to be initialized from the following.
DSP PARAM Initializes all parameters for the sound
field programs.
ALL
Resets this unit to default factory settings.
CANCEL (Default)
Does not initialize.
En
66