Specifications - Yaesu FT-2000 Operating Manual

S
PECIFICATIONS
General
Rx Frequency Range:
Tx Frequency Ranges:
Frequency Stability:
Operating Temperature Range:
Emission Modes:
Frequency Steps:
Antenna Impedance:
Power Consumption:
Supply Voltage:
Dimensions (WxHxD):
Weight (approx.):
Transmitter
Power Output:
Modulation Types:
Maximum FM Deviation:
Harmonic Radiation:
SSB Carrier Suppression:
Undesired Sideband Suppression:
Audio Response (SSB):
3rd-order IMD:
Microphone Impedance:
FP-2000 Power Supply
Input Voltage:
Output Voltage:
Maximum Power Consumption (approx.):
Maximum Output Current:
Case Size (WxHxD):
Weight (approx.):
Page 132
30 kHz - 60 MHz (operating)
160 - 6 m (specified performance, Amateur bands only)
160 - 6 m (Amateur bands only)
±0.5 ppm (after 1 minute @+77 °F [+25 °C])
±1.0 ppm (after 1 minute @+14 °F ~ +122 °F [–10 °C ~ +50 °C])
14 °F ~ +122 °F (–10 °C ~ +50 °C)
A1A (CW), A3E (AM), J3E (LSB, USB), F3E (FM),
F1B (RTTY), F1D (PACKET), F2D (PACKET)
1/10 Hz (SSB,CW, & AM), 100 Hz (FM)
50 Ohms, unbalanced
16.7 - 150 Ohms, unbalanced (Tuner ON, 160 - 10 m Amateur bands)
25 - 100 Ohms, unbalanced (Tuner ON, 6 m Amateur band)
Rx (no signal) 70 VA
Rx (signal present) 80 VA
Tx (200 W) 720 VA
AC: 90 VAC - 132 VAC or 180 VAC- 264 VAC
16.1" x 5.3" x 13.8" (410 x 135 x 350 mm)
34.1 lbs (15.5 kg)
10 - 200 watts
10 - 75 watts (Class-A, SSB)
5 - 50 watts (AM carrier)
J3E (SSB): Balanced,
A3E (AM): Low-Level (Early Stage),
F3E (FM): Variable Reactance
±5.0 kHz/±2.5 kHz
Better than –60 dB
At least 60 dB below peak output
At least 60 dB below peak output
Not more than –6 dB from 300 to 2700 Hz
–31 dB @14 MHz, 200 watts PEP
–45 dB @14 MHz, 75 watts Class-A
600 Ohms (200 to 10 kOhms)
90 VAC - 264 VAC, 50/60 Hz (Universal)
50 VDC , 13.8 VDC
720 VA
50 V: 12 A, 13.8 V: 6 A
3.9" x 5.3" x 13.8" (100 x 135 x 350 mm)
7.9 lb (3.6 kg)
FT-2000D O M