Yaesu FT-2000 Operating Manual page 26

F P
RONT ANEL
LOCK Switch
This button toggles locking of the Main Tuning Dial
knob, to prevent accidental frequency changes. When
the button is active, the Main Tuning Dial knob can
still be turned, but the frequency will not change, and
the " " icon appears in the display.
A B Switch
Press this button momentarily to transfer data from the
Main band (VFO-A) frequency (or a recalled memory
channel) to the Sub band (VFO-B), overwriting any
previous contents in the Sub band (VFO-B). Use this
key to set both Main band (VFO-A) and Sub band
(VFO-B) receivers to the same frequency and mode.
A B Switch
Pressing this button momentarily exchanges the con-
tents of the Main band (VFO-A) (or a recalled memory
channel) and the Sub band (VFO-B).
Page 24
C
ONTROLS
& S
WITCHES
CLAR
+
V/M Switch
This button toggles Main band (VFO-A) receiver op-
eration between the memory system and the VFO. Ei-
ther " " or " " will be displayed to the under
the main frequency display field to indicate the cur-
rent selection. If you have tuned off of a Memory chan-
nel frequency (MT), pressing this button returns the
display to the original memory contents (MR), and
pressing it once more returns operation to the Main
VFO (no icon).
M A Switch
Pressing this button momentarily displays the contents
of the currently-selected memory channel for three sec-
onds.
Holding this button in for 2 seconds copies the data
from the currently-selected memory to the Main VFO
(VFO-A), as two beeps sound. Previous data in the
Main VFO will be overwritten.
FT-2000D O M