Printing Custom Size Paper - Xerox Phaser 7760 User Manual

Printing Custom Size Paper

In addition to the wide variety of standard paper sizes that you can use for printing, you can
also print on custom size paper within the following dimensions.
Short Edge 100–305 mm (3.95–12.00 in.)
Long Edge 140–1200 mm (5.5–47.25 in.)
Printing Custom Size Paper from Tray 1 (MPT)
1. Open Tray 1 (MPT).
Long-Edge Feed
2. Insert custom size paper in Tray 1 (MPT) and adjust the guides to fit the paper.
3. When the control panel prompts you to confirm the type and size of paper in the tray:
a. Select
Change setup
b.
Select the appropriate paper type, and then press the OK button.
c.
Select
New Custom Size
d. If the measurement shown for the short edge of the paper is correct, press the
OK button. Otherwise, select
Down Arrow button to scroll to the correct measurement, and then press the
OK button.
e. If the measurement shown for the long edge of the paper is correct, press the
OK button. Otherwise, select
Down Arrow button to scroll to the correct measurement, and then press the
OK button.
f. If the control panel prompts you for the paper orientation, select
you loaded the long edge of the paper to enter the printer first or select
Short-Edge Feed
4. In the printer driver, select Tray 1 (MPT) as the paper source.
Tray 1 (MPT)
7760-166
, and then press the OK button.
, and then press the OK button.
, press the OK button, use the Up Arrow or
Change
, press the OK button, use the Up Arrow or
Change
if you loaded the short edge to enter the printer first.
Phaser® 7760 Color Laser Printer
3-45
Printing on Specialty Media
Tray 2
140–297 mm (5.5–11.70 in.)
182–432 mm (7.15–17.00 in.)
Short-Edge Feed
Long-Edge Feed
7760-167
if