Printing Transparencies from Tray 1 (MPT)
1.
Open Tray 1 (MPT).
2.
Insert the transparencies into the tray and adjust the paper guides to match the size of the
transparencies.
■
Place the long edge of the transparencies entering the printer first.
■
Do not load more than 50 transparencies.
3.
When the control panel prompts you to confirm the type and size of paper in the tray:
a.
Select
Change setup
b.
Select
Xerox Transparency
c.
Select the transparency size, and then press the OK button.
Note:
For some sizes that can be loaded in either direction, you need to select the size
with the letters
(Long-Edge Feed) if you loaded the long edge of the paper to enter the
LEF
printer first or
(Short-Edge Feed) if you loaded the short edge to enter the printer first.
SEF
4.
In the printer driver, select Transparency as the paper type and/or select Tray 1 (MPT) as
the paper source.
MAX
, and then press the OK button.
, and then press the OK button.
Phaser® 7760 Color Laser Printer
3-34
Printing on Specialty Media
7760-027
7760-121