Using Setip (Phaser 3250Dn Only); Installing Setip; Using Setip - Xerox Phaser 3250 User Manual

2
Using SetIP (Phaser 3250DN
only)
•

Installing SetIP

•

Using SetIP

Installing SetIP
1
Make sure that the printer is connected to your computer and
powered on.
2
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation
window appears.
If the installation window does not appear, click Start and then
Run. Type X:\Setup.exe, replacing "X" with the letter which
represents your drive and click OK.
If you use Windows Vista, click Start → All programs →
Accessories → Run, and type X:\Setup.exe.
If the AutoPlay window appears in Windows Vista, click Run
Setup.exe in Install or run program field, and click Continue
in the User Account Control window.
3
Click Install SetIP Utility(Optional).
11

Using SetIP (Phaser 3250DN only)

4
Click Next.
5
Click Next.
6
Click Finish.
Using SetIP
1
From the Windows Start menu, select Programs or All
Programs Xerox Phaser 3250
The program automatically detects and displays new and
configured print servers on your network.
SetIP SetIP.