Xerox Phaser 3250 User Manual page 57

N
: If your printer is not already connected to the computer, the
OTE
following window will appear.
• After connecting the printer, click Next.
• If you don't want to connect the printer at this time, click Next, and
No on the following screen. Then the installation will start and a
test page will not be printed at the end of the installation.
• The installation window that appears in this User Guide may
differ depending on the printer and interface in use.
5
After the installation is finished, a window asking you to print a
test page appears. If you choose to print a test page, select the
checkbox and click Next .
Next
Otherwise, just click and skip to step 7.
6
If the test page prints out correctly, click Yes.
If not, click No to reprint it.
7
Click Finish.
N : After setup is complete, if your printer driver does not work
OTE
properly, check the printer and power cables to make sure they are
connected properly, then reinstall the printer driver. See
"Reinstalling Printer Software" on page 9.
5
Installing Printer Software in Windows
Custom Installation
You can choose individual components to install.
1
Make sure that the printer is connected to your computer and
powered on.
2
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation
window appears.
If the installation window does not appear, click Start and then
Run. Type X:\Setup.exe, replacing "X" with the letter which
represents your drive and click OK.
If you use Windows Vista, click Start → All programs →
Accessories → Run, and type X:\Setup.exe.
If the AutoPlay window appears in Windows Vista, click Run
Setup.exe in Install or run program field, and click Continue
in the User Account Control window.
3
Click Install Software.
4
Select Custom installation. Click Next.