Advertisement
Quick Links
The diagram above is just for reference. Please take the
appearance of the actual product as the standard.
Midea Storage Electric Water Heater
Instruction Manual
Model: D10-15FL
D15-15FL
Thank you very much for purchasing our water heater.
Before installing and operating your water heater, please
read this manual carefully and keep it for future reference.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Midea D10-15FL
Summary of Contents for Midea D10-15FL
- Page 1 The diagram above is just for reference. Please take the appearance of the actual product as the standard. Midea Storage Electric Water Heater Instruction Manual Model: D10-15FL D15-15FL Thank you very much for purchasing our water heater. Before installing and operating your water heater, please...
-
Page 2: Table Of Contents
General Remark ● The installation and maintenance has to be carried out by qualified professionals or Midea authorized technicians. ● The manufacturer shall not be held responsible for any damage or malfunction caused by wrong installation or failing to comply with following instructions included in this pamphlet. -
Page 3: Cautions
1. CAUTIONS Before installing this water heater,check and confirm that the earthing on the supply socket is reliably grounded. Otherwise, the electrical water heater can not be installed and used. Do not use extension boards. Incorrect installation and use of this electrical water heater may result in serious injuries and loss of property. -
Page 4: Product Introduction
● If any parts and components of this electrical water heater are damaged please contact customer care center for repair. ● This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. -
Page 5: Wiring Diagram
2.3 Brief introduction of product structure Thermometer Shell Inner tank Thermal insulation Power cord Heating element Anode Hot water outlet Cold water inlet On/Off (Optional) Temperature adjusting knob Heating indicator light Power indicador light 2.4 Internal Wire Diagram Thermal Cut Out Thermostat Switch Brown... -
Page 6: Unit Installation
3. UNIT INSTALLATION 3.1 Installation Instruction ① This electrical water heater shall be installed on a solid wall. If the strength of the wall cannot bear the load equal to two times of the total weight of the heater filled fully with water, it is then necessary to install a special support. - Page 7 Power supply cord Cold water inlet Hot water outlet Pressure relief valve Pressure release hole Adjusting handle for Joint screw for cold water inlet mixing valve Hot water (Fig.4) ④ If the users want to realize a multi-way supply system, refer to the method shown in fig.5 for connection of the pipelines.
-
Page 8: Methods Of Using
4. METHODS OF USING ● First, open any one of the outlet valves at the outlet of the water heater, then, open the inlet valve. The water heater gets filled with water. When water flows out of the outlet pipe it implies that the heater has been filled fully with water, and the outlet valve can be closed. -
Page 9: Troubleshooting
6. TROUBLESHOOTING NOTE Parts illustrated in this use and care manual are indicative only, parts provided with the product may differ with illustrations.This product is intended for household use only. Specifications are subject to change without notice.
Need help?
Do you have a question about the D10-15FL and is the answer not in the manual?
Questions and answers