Number Of Rings; Remote Access Code; Message Alert Tone - VTech CS6124 User Manual

Answering system settings

Number of rings

You can choose from two, three, four, five or six rings; or toll saver. With toll saver
selected, the answering system answers after two rings when you have new
messages, and after four rings when you have no new messages. This enables you
to check for new messages and avoid paying unnecessary long distance charges if
you are calling from outside your local area.
1. Press MENU/
SELECT
CID or
2. Press
CID or
3. Press
4. Press CID or
CID or
5. Press
/SELECT to confirm your selection. You hear a confirmation tone.
MENU

Remote access code

A two-digit security code is required to access the answering system remotely from
any touch-tone telephone. The preset code is 19. You can set the code from 00 to 99.
1. Press
MENU/
SELECT
CID or
2. Press
CID or
3. Press
4. Press CID or
5. Press the dialing keys (0-9) to enter the code or
to 99, then press
confirmation tone.

Message alert tone

This telephone beeps every 10 seconds to alert you of new messages. The tone
stops when all new messages have been reviewed. Press MENU/
handset is not in use.
To turn this feature on or off:
1. Press MENU/
SELECT
2. Press CID or
3. Press CID or
4. Press CID or
5. Press CID or
your selection. You hear a confirmation tone.
• The answering system must be turned on for the message alert tone
to function.
Press any key on the telephone base (except /FIND HANDSET) to temporarily
•
silence the message alert tone.
when the handset is not in use.
to select Answering sys, then press
to select Ans sys setup, then press
to select # of rings, then press
to choose from 6, 5, 4, 3, 2 or Toll save
when the handset is not in use.
to select Answering sys, then press
to select Ans sys setup, then press
to select
Remote code
/SELECT to confirm your selection. You hear a
MENU
when the handset is not in use.
to select Answering sys, then press
to select Ans sys setup, then press
to select Msg alert tone, then press
to choose or
On
MENU
, then press
CID or
, then press
Off
MENU
23
/SELECT .
MENU
/SELECT
MENU
/SELECT.
, then press
r
/SELECT
MENU
/SELECT
MENU
/SELECT.
MENU
to select from 00
when the
SELECT
/SELECT.
MENU
/SELECT.
MENU
/SELECT.
MENU
/SELECT to confirm
.
.
.