Vivotek FD8361L User Manual page 133

transmission_mode Tx
network_wire 1,
<boolean>
network_wireless 0,
<boolean>
wireless_s802dot11 0,
b <boolean>
wireless_s802dot11 0,
g <boolean>
wireless_beginchan 255,
nel <positive integer>
wireless_endchanne 255,
l <positive integer>
wireless_encrypt_w 0,
ep <boolean>
wireless_encrypt_w 0,
pa <boolean>
wireless_encrypt_w 0,
pa2 <boolean>
derivative_brand 1,
<boolean>
npreset 20,
<positive integer>
eptz 7,
<positive integer>
nanystream 1,
<positive integer>
iva 0,
<boolean>
ir 1,
<boolean>
tampering 1,
0/7 Indicate transmission mode of the machine:
TX = server, Rx = receiver box, Both = DVR.
0/7 Indicate whether to support Ethernet.
0/7 Indicate whether to support wireless.
0/7 Indicate whether to support wireless
802.11b+.
0/7 Indicate whether to support wireless
802.11g.
0/7 Indicate the begin channel of wireless
network
0/7 Indicate the end channel of wireless
network
0/7 Indicate whether to support wireless WEP.
0/7 Indicate whether to support wireless WPA.
0/7 Indicate whether to support wireless WPA2.
0/7 Indicate whether to support the upgrade
function for the derivative brand. For
example, if the value is true, the VVTK
product can be upgraded to VVXX.
(TCVV<->TCXX is excepted)
0/7 Number of preset locations.
0/7 A 32-bit integer, each bit can be set
separately as follows:
Bit 0 => stream 1 supports ePTZ or not.
Bit 1 => stream 2 supports ePTZ or not.
The rest may be deduced by analogy
0/7 number of any media stream per channel
0/7 Indicate whether to support Intelligent
Video analysis
0/7 Indicate whether to support IR led.
0/7 Indicate whether to support tampering
VIVOTEK
User's Manual - 133