Vivotek FD8361L User Manual page 112

VIVOTEK
Daylight_enable <boolean>
daylight_dstactual 1~4
mode
daylight_auto_beg string[19]
intime
daylight_auto_end string[19]
time
daylight_timezone string
s
updateinterval 0,
3600,
86400,
604800,
2592000
Restore 0,
<positive integer>
Reset 0,
<positive integer>
restoreexceptnet 0,
<positive integer>
restoreexceptdst 0,
<positive integer>
112 - User's Manual
360: GMT 09:00 Osaka, Sapporo, Tokyo,
Seoul, Yakutsk
380: GMT 09:30 Adelaide, Darwin
400: GMT 10:00 Brisbane, Canberra,
Melbourne, Sydney, Guam, Vladivostok
440: GMT 11:00 Magadan, Solomon Is., New
Caledonia
480: GMT 12:00 Aucklan, Wellington, Fiji,
Kamchatka, Marshall Is.
520: GMT 13:00 Nuku'Alofa
6/6 Enable automatic
zone.
6/7 Check if current time is under daylight saving
time.
(Used internally)
6/7 Display the current daylight saving start time.
(product dependent)
6/7 Display the current daylight saving end time.
(product dependent)
6/6 List time zone index which support daylight
saving time.
6/6 0 to Disable automatic time adjustment,
otherwise, it indicates the seconds between
NTP automatic update intervals.
7/6 Restore the system parameters to default
values after <value> seconds.
7/6 Restart the server after <value> seconds if
<value> is non-negative.
7/6 Restore the system parameters to default
values except (ipaddress, subnet, router, dns1,
dns2, pppoe).
This command can cooperate with other
"restoreexceptXYZ" commands. When
cooperating with others, the system
parameters will be restored to the default value
except for a union of the combined results.
7/6 Restore the system parameters to default
values except all daylight saving time settings.
daylight saving time in time