Vivotek FD8361L User Manual page 128

VIVOTEK
serverip <IP address>
serverport 514, 1025~65535
level 0~7
Group: camctrl
NAME VALUE
enablehttptunnel <boolean>
Group: camctrl_c<0~(n-1)> for n channel product
NAME VALUE
panspeed -5 ~ 5
tiltspeed -5 ~ 5
zoomspeed -5 ~ 5
autospeed -5 ~ 5
focusspeed -5 ~ 5
patrolseq string[64]
patroldwelling string[128]
preset_i<0~(npre string[40]
set-1)>_name
preset_i<0~(npre 0~999
set-1)>_dwelling
uart 0 ~ (m-1), m
is UART count
cameraid 0~255
isptz 0 ~ 2
128 - User's Manual
6/6 Log server IP address.
6/6 Server port used for log.
6/6 Levels used to distinguish the importance of the
information:
0: LOG_EMERG
1: LOG_ALERT
2: LOG_CRIT
3: LOG_ERR
4: LOG_WARNING
5: LOG_NOTICE
6: LOG_INFO
7: LOG_DEBUG
SECURITY DESCRIPTION
(get/set)
1/4 Enable HTTP tunnel for camera control.
(capability.ptzenabled)
SECURITY DESCRIPTION
(get/set)
1/4 Pan speed
1/4 Tilt speed
1/4 Zoom speed
1/4 Auto pan speed
1/4 Auto focus speed
1/4 (For external device)
The indexes of patrol points, separated by ","
1/4 (For external device)
The dwelling time of each patrol point, separated by ","
1/4 Name of the preset location.
1/4 The dwelling time of each preset location.
1/4 Select corresponding uart
(capability.nuart>0).
1/4 Camera ID controlling external PTZ camera.
1/4 0: disable PTZ commands.
1: enable PTZ commands with PTZ driver.