Download Print this page
PCE Instruments PCE-SM 5 User Manual
PCE Instruments PCE-SM 5 User Manual

PCE Instruments PCE-SM 5 User Manual

Salt meter

Advertisement

Quick Links

USER MANUAL
SALT METER
PCE-SM 5
User manuals in various languages (français, italiano, español, português, nederlands,
türk, polski) can be found via our product search on:
www.pce-instruments.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the PCE-SM 5 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for PCE Instruments PCE-SM 5

  • Page 1 USER MANUAL SALT METER PCE-SM 5 User manuals in various languages (français, italiano, español, português, nederlands, türk, polski) can be found via our product search on: www.pce-instruments.com...
  • Page 2: Product Description

    PRODUCT DESCRIPTION High resolution, High precision measurement,Large screen digital display, Replaceable battery Sound alert function in low banttery, measuerment start and end. PRODUCT SPECIFICATION Testing principle Electrical conductivity Methods salt testing range: 0.01% ... 5.00% 10.00% 15.00% 26.00% Temperatur: 1 °C ... 99°C (salt < 15% ) ; < 50°C ( salt > 15% ) resolution: 0 ...
  • Page 3: Using Method

    The data on the above page are theoretical values, which are obtained from our internal laboratory in a specific test environment (the solvent is pure water with no conductivity, The solute is 99.9% NaCl analyti- cal pure, 1010kpa at the same standard atmospheric pre-ssure, and the temperature is 25 °C ± 3 °C), which may cause The individual differences of products, software versions, use conditions and environmental factors are slightly dif-ferent.
  • Page 4: Measurement Precautions

    MEASUREMENT PRECAUTIONS For the first test, in order to ensure the accuracy of the test, it is necessary to clean the two metal half rings of the front probe part, which can be cleaned with clean water, then wiped with paper towel or soft cloth to clean the water drops, and then tested.
  • Page 5 STORAGE AND PRECAUTIONS 1) Unreliable near heaters, heaters and other hot objects 2) Avoid scalding when testing hot objects 3) Do not mix the rechargeable battery with other batteries 4) To prevent product failure, do not disassemble the product at will 5) If the product is dropped or impacted, there will be errors in the test 6) The sensor shall not be scratched, foreign matters or deformed, otherwise the test will have a large error, so it shall be kept properly...
  • Page 6 For countries outside the EU, batteries and devices should be disposed of in accordan- ce with your local waste regulations. If you have any questions, please contact PCE Instruments. ce with your local waste regulations. If you have any questions, please contact PCE Instruments.