Configuring The Onetouch Buttons - Visioneer Strobe XP 470 User Manual

Right-click on a button (for example,
button 2) and the Properties window
opens for that button.
C
ONFIGURING THE
Each OneTouch button configuration consists of a Destination
Application, a Scan Configuration, and a Document Format. The
OneTouch Properties window is where you select these three elements
for a button.
To open the OneTouch Properties window:
1. Click the OneTouch icon. It is located in the Windows System Tray
at the bottom right corner of the screen.
2. Right-click a button on the OneTouch Button Panel.
Reminder: Remember that left-clicking a button on the OneTouch
Button Panel starts the scanner scanning. Right-clicking opens the
OneTouch Properties window.
The OneTouch Properties window opens for that button.
The OneTouch Properties window also opens when you press, hold
down, and release the Simplex or Duplex button on the scanner.
C
ONFIGURING THE
O T B
NE OUCH UTTONS
O T B
NE OUCH UTTONS
35