Configuring The Onetouch Buttons - Visioneer PATRIOT 480 SCANNER User Manual

C
When you installed OneTouch, the software was configured with the
applications on your computer that you can scan to. Each OneTouch
button configuration consists of a Destination Application, a Scan
Configuration, and a File Format. The OneTouch Properties window is
where you select these three elements for a button.
To open the OneTouch Properties window:
There are two methods that you can use to open the OneTouch Properties.
■
■
Right-click on a button (for example, button 2)
and the Properties window opens for that button.
ONFIGURING THE
Left-click on the OneTouch icon, in the Windows Notification Area,
then right-click on one of the destination icons.
The OneTouch Properties window opens to the button function that
you right-clicked on.
Press, hold down for at least 3 seconds, then release either the Simplex or
Duplex button.
The OneTouch Properties window opens to the function number that is
displayed on the scanner's LED display.
C
ONFIGURING THE
O T B
NE OUCH UTTONS
O T B
NE OUCH UTTONS
45